Design my enclosure, make $6 paypal.

[CrAiZ3 10+ year member]

I need an enclosure for an Audioque HDC318 tuned at 40hz. It will be in the back of a 96 Jeep Cherokee so I have plenty of room. To be honest, im novice in the box building seen. I just want it to have the loudest SPL possible, because I will be competing.

It's simple. Make me plans, and a diagram and I will happily send you $6 paypal.

Make me a "happy camper."

NOTE:

Hoping for something in the range of 6-8 cu. ft.

Specs:

http://www.audioque.com/aq/HDCSeries.htm

Space I have.

22" high.

42" wide.

30" Depth. (From back seat to trunk door.)

Click to read more...

 

[silvercookie 5,000+ posts]

should also note if you want a musical box or a fart box

 

[RAM_Designs 5,000+ posts]

If you want something for pure spl, I'd suggest tuning higher(48-50hz seems to work great in those older Jeep Cherokees). If you're using it for your daily system, I'd tune lower(35hz).

 

[miker 5,000+ posts]

Width and depth would be important dimensions.

 

[yunvme666 10+ year member]

i have 2 designs for my 9518 but theyre for aeros....

 

[miker 5,000+ posts]

Ok.. Here's one at 35hz and 7cf net.

40" wide, 25" deep, 18" tall.

port is 16.5" high x 6.75" wide 23" long.

Tell me if you like it... I can change the dimensions up easily too.

 

[CrAiZ3 10+ year member]

Its going to be for daily use, however I want the max SPL out of it. Especially with the rap music I listen too.

EDIT:

edited the orignal post.

EDIT2:

Does anyone know what a shop charges for labor when building a box?

 

[NissanKicker 10+ year member]

200 & up! for labor...

 

[miker 5,000+ posts]

200 & up! for labor...

He'd be much better off finding someone on these boards to make him one I think //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[CrAiZ3 10+ year member]

He'd be much better off finding someone on these boards to make him one I think //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

im talking to someone local now, and I have no idea what to charge him. All I need him to do is cut and assemble it.

After I get a design.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[miker 5,000+ posts]

Huh.. nvm

oh PM btw

 

[iamamp3pimp 5,000+ posts]

6 bucks, thats all?

i used to pull 15 for my designs

never had any complaints

 

[CrAiZ3 10+ year member]

6 bucks, thats all?
i used to pull 15 for my designs

never had any complaints

Best I can do. Moneys tight at the moment.

And someone offered one for free, so I think 6 bucks is reasonable.

 

[psych0ticnemes1 5,000+ posts]

I'll do the design for that price. Shoot me a PM if you are interested.