Design Help

[Freelander 10+ year member]

I'm trying to think of how to build my box for my freelander. I was thinking of doing the box with an angled front with the port on the bottom. How hard will this be to accurately calculate air space and tuning? Could anyone do me up some designs so I can get some ideas?

The box is going to be for a single FI Q 12" and I would like it 2.5ft^3 tuned around 32hz.

Here are the deminsions I have to work with, I'd like the box to be as narrow as possible so I still have some cargo space. Working deminsions are 38 1/2" wide, 27" deep and 20"tall.

Click to read more...

 

[Freelander 10+ year member]

anyone?

 

[Freelander 10+ year member]

**** I guess no one wants to help me?

 

[mlstrass 5,000+ posts]

Use this to figure your box out. Wedge 2 style and height 1 is the bottom. Port won't be on the angled face, so no biggie.

http://www.the12volt.com/caraudio/boxcalcs.asp#wed2

 

[Freelander 10+ year member]

well that will help me a little bit but I was more or less looking for some design help. I've never built a ported box and really don't know where to start. Even after reading about it I'm sure I'd mess it up somehow.

 

[Peaks 10+ year member]

PM Ionsql he maybe able to help you out