dd1508 6th order

[stubbs563 10+ year member]

Someone seems a little butt hurt

 

[BlactimusCrime 10+ year member]

Someone seems a little butt hurt

ndeed.

 

[RAM_Designs 5,000+ posts]

Seems like everyone is butthurt.

 

[Firebird 1991 10+ year member]

lulz..so back on topic..

 

[gunz4me2 10+ year member]

I ran my 1508 in 1 cubic foot tuned to 35 Hz and powered the sub with a 25 to Life Punch 150. I can't recall ever bottoming out the sub and most certainly didn't blow it with close to 1,000 watts RMS on tap.

 

[Firebird 1991 10+ year member]

do u happen to have box specs for that box gunz4me2?

 

[l7runner 10+ year member]

throw some 2x4 pieces or anything to occupy some space in the box and see if that resolves your issue.

 

[Firebird 1991 10+ year member]

l7 runner thats a good idea! Thanks bro

 

[gunz4me2 10+ year member]

Well, it was an enclosure I had for a 10" subwoofer that I put a baffle on to run the 8. That enclosure was 12" high x 24" wide x 11" deep with a slot port .75" wide x 10.5" high x 15.5" long. Since that was in the trunk I wasn't as concerned about a larger port area.

I have a smaller enclosure designed up for a single 1508 to use in my wife's 2011 Genesis coupe. I am planning on building it 10" high x 25" wide x 10" deep and using a 3" aeroport 16" long out the side of the enclosure. I am going to experiment with loading the port off of a wheel well and firing the sub into the rear seat and rearward with/without the rear seatback down to see what performs the best in her vehicle. I still may change this to a slot port just to make the build go quicker!