DD 6.5 Box Help

[One Bad MOFO 10+ year member]

So I may be buying a car that I don't want a lot of extra weight in, so I don't want to do a huge system. I will probably only use my dd 6.5lt's. What I need to know is what kind of box should I put them in that would make them as loud as possible. Each would be on 150 watts.

Series

W6.5

Voice Coil Diameter

1.5"

Magnet Weight

28 oz

Power Handling RMS/Music/Peak

100/200/400

Suspension

25mm

Nominal Impedance

4.0 Ohm

DC Resistance

3.1 Ohm

Model

W6.5

Woofer Diameter

6.5"

Free Air Resonance

36 Hz

Qts

0.33

Qes

0.34

Qms

8.8

Vas

21 L

Le mH

Sensitivity

91 dB

Shipping Weight

11 lbs

they don't show the lt series on there any more so???

Click to read more...

 

[Immacomputer 10+ year member]

They're not going to be ridiculously loud but I would say about .5 cubes each tuned to about 40-45hz would work.

 

[Trixter 10+ year member]

wicked one.....

 

[One Bad MOFO 10+ year member]

They're not going to be ridiculously loud but I would say about .5 cubes each tuned to about 40-45hz would work.

half a cube each? I was originally thinking something crazy like a t-line or a horn or something.

 

[Immacomputer 10+ year member]

Well a t-line isn't going to give you huge output. A horn might work depending on your vehicle but the amount of wood is going to really weigh it down. Horns get real big, real fast when trying to tune them low.

This horn is tuned to 40hz and was for a single 6.5" driver:

 

[One Bad MOFO 10+ year member]

Well a t-line isn't going to give you huge output. A horn might work depending on your vehicle but the amount of wood is going to really weigh it down. Horns get real big, real fast when trying to tune them low.
This horn is tuned to 40hz and was for a single 6.5" driver:

thats kindof why i decided against the t-line. and yea that horn looks huge i don't think i want to do that. Would like an abc box work well at all?

 

[btlking 10+ year member]

1 cube ported to 34hz //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[One Bad MOFO 10+ year member]

1 cube ported to 34hz //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I want something kinda crazy though where people think its more than it really is.

 

[btlking 10+ year member]

dude what happened to the box i built for them? you know the 20 minute box build that thing wangs

 

[One Bad MOFO 10+ year member]

dude what happened to the box i built for them? you know the 20 minute box build that thing wangs

i don't really like the idea of having a duct tape box for my loud box //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[btlking 10+ year member]

you should post up pics after you get home from work

 

[One Bad MOFO 10+ year member]

you should post up pics after you get home from work

pics of what exactly?

 

[mlstrass 5,000+ posts]

what kind of POS are you buying that a 75# sub/box is going to make a diff???

Ricers FTL.....LOL

Put a single 15 in there and be done with it....

 

[60ndown 10+ year member]

id take my time and do a really good install with the 6.5s IN THE FRONT DOORS.

make sure theres no rattles (difficult), sperate front and back waves but leave o.b. and you will have very snappy and articulate bass / midbass down to about 40 hz, that can get very loud.

 

[inapontiac 10+ year member]

tune it around 40...should seem louder than you think.

PS: can i see pictures of the lil woofer?