danger ranger build

[RangerDangerV2 5,000+ posts]

so I know that putting my mids there is going to mess with sound imaging and what not... but there is a space issue that I have to deal with and I already explained that... but the good part is that I demo with either one or both doors open... being that its a small truck it has massive gains when a door is open... (my old setup gained 4dbs just from opening the door, and that was 4 dbs going from the window open to the door open...) well will see how it works though. worst case scenario, I hate it, rip it out, and put the stock panels back in.

 

[LosIsATool 5,000+ posts]

because I have to sit almost all the way forward. I would put them more towards the front but my knee is hitting the optimal part of the door...

You seem to have some skills, putem in the kick or something

 

[RangerDangerV2 5,000+ posts]

You seem to have some skills, putem in the kick or something

I would if I have room.... thats the only bad part of sitting so far forward. its not uncomfortable because I normally sit like that but the problem is my long azz legs get in the way lol. I dont think it will be too bad because they are right at my side... i will be putting tweets in front of me somewhere I just dont know exactly where yet. the good thing is, all of it is removeable and I can change the positioning to my liking, as long as the space permits lmao

 

[RangerDangerV2 5,000+ posts]

oh yeah... this is my final design of my wall. 12.xxx cu ft tuned to 34.xxxhz... for 2 AA chaos 18s on 4k. I may pull the baffle out in the future and throw 10 10's in there... thats later on though.

 

[LosIsATool 5,000+ posts]

I would if I have room.... thats the only bad part of sitting so far forward. its not uncomfortable because I normally sit like that but the problem is my long azz legs get in the way lol. I dont think it will be too bad because they are right at my side... i will be putting tweets in front of me somewhere I just dont know exactly where yet. the good thing is, all of it is removeable and I can change the positioning to my liking, as long as the space permits lmao

Be careful with mid tweeter separation. You might need to add a small mid range close to the tweeter. In the pillar or something.

 

[RangerDangerV2 5,000+ posts]

Be careful with mid tweeter separation. You might need to add a small mid range close to the tweeter. In the pillar or something.

thanks for the help! ive never built a front stage before... but like I said im going to do some experimenting to see what I want. I may put a super tweet right in there with the mids... sq and imaging isnt really a big deal for me being that my lower frequencies cover up my mids and highs... if you catch my drift lol.

 

[RangerDangerV2 5,000+ posts]

well if some of you were wondering why I havent started building... its because money is hella tight this month. next month I will start and hopefully finish by the end of sep. good thing school is starting because I have access to panel saws and large table saws. Im really excited to get this wall going.... but on a lighter note I installed my volt meter in my a pillar. looks pretty seqqsy. I just have to glass around it and wrap the pillars inn vinyl. pics will be posted when done.

 

[pro-rabbit 5,000+ posts]

Is this done yet?

//content.invisioncic.com/y282845/emoticons/sneaky.gif.7189749b3a3f769e8815b47e8ae87f88.gif

 

[RangerDangerV2 5,000+ posts]

 

[RangerDangerV2 5,000+ posts]

nobody kerrs....

 

[04murdalanche]

moar!

 

[CAT MAN 5,000+ posts]

gap city bish gap gap city bish

 

[Villeza1 10+ year member]

GO GO RANGERDANGER! (Old School Power Ranger's Theme song)

@RangerDanger

 

[mlstrass 5,000+ posts]

my doors have the mids back like that and tweets in the A pillars. Sounds good actually, so you should be fine...

 

[Bettr n' Revrse 5,000+ posts]

Mehhhh

 

[Bettr n' Revrse 5,000+ posts]

Why are you even attempting a good sound stage when your walling two 18's?

 

[RangerDangerV2 5,000+ posts]

so I did the third baffle on the sides, closed up the gaps and what not. now I just need a gallon of resin or so and I can do the front baffles. I know that it looks really really ugly now but when it is done it will be very clean.

 

---------- Post added at 05:01 PM ---------- Previous post was at 05:01 PM ----------

 

Why are you even attempting a good sound stage when your walling two 18's?

who said good? I just want one that keeps up.

 

[Jerhemy 10+ year member]

moar pics please. can't wait to see the end result

 

[THATpurpleKUSH 5,000+ posts]

Are you trying to be like LACRX byt starting a build thread, never finishing it while posting insipid pics along the way?

 

[RangerDangerV2 5,000+ posts]

Are you trying to be like LACRX byt starting a build thread, never finishing it while posting insipid pics along the way?

no, just been really busy lately... thus the lack of me being on here. not too much time to work on the wall either. ill try to get more pics when I have some more done but it may be a little while.