CRD Mazda CX-7 SQ Install

[CRD 10+ year member]

A little update on the midranges, I have the kick panel sanwiched between the midrange and midarange bezel, I will reduce the ring of the bezel at work using a lathe, I will reduced to the diamater of the 4 screws. just like the first pic marked in green

 

[CRD 10+ year member]

Here is a design I'm working for the amp rack , I still need to design the sides to cover the wires and a plexi glass in front and top to show the amps with a blue neon light. This is only the design of the main frame.

 

[garvinzoom]

Looking good! I sent you a PM also.

Thanks

 

[CRD 10+ year member]

This is the final setup, I know it will last 1-2 months installed before I decide to change the equipment , but for now this is what I'm going to install this weekend. I will post pictures of the process.

 

[Rashaddd 5,000+ posts]

looks like it will be very nice, I like your work

 

[CRD 10+ year member]

Yeah baby!!!

I finally finish the bezel, now I need to put some primer+sand, black paint+sand, black paint + more sanding. and wallaaa

Tomorrow is going to be a busy day //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[CRD 10+ year member]

I had to re-design the previous amp rack , because I erased the autocad file by mistake and lost all the measurements, so I did a simple design. The amp rack will sit on the center of the trunk with (1) 10" sub on each side. More pictures when finsih the other stuff //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Orion Man 10+ year member]

This is looking really good bro. Nice job the little details.

 

[CRD 10+ year member]

Here is another update, I also labeled my wires //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif and finish all the wiring on the speakers.

 

[bigbangtheory 5,000+ posts]

Very nice setup! I would love to take a listen to that.

Also Peel and seal isn't as bad as people make it out to be. If you take your time and clean first and heat it up, it will stay.

Good job and look foward to the finished product.

 

[CRD 10+ year member]

Today I received my new Daytons 8" Subwoofers to replace the 7" ones I have. I'm making the baffles tomorrow. I have everything ready to install I just need time, and I'm still in the process of moving //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[CRD 10+ year member]

YES //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Finally have the main piece of the puzzle done, without it I couldn't install the system. In my opinion I give the piece a 8.5 out of 10 but looks good in day light.

8" LCD Touchscreen PC Monitor fused into the scoche double din kit for my cx-7.

Now is time to choose the program I will use "front end" and look for a good sound card either PCMCIA or PCI don't know yet wich one I will use if my motherboard or laptop. I will test first with the laptop.

 

[CRD 10+ year member]

Here is another picture with the stock dash piece.

 

[CRD 10+ year member]

More pics, I still have space for a Widescreen 9.2" touchscreen, but I need to find one with good brightness

 

[KINGDELL91 10+ year member]

nice work