could someone retune this box for me?

[aaron7114 10+ year member]

I used this box design for my L5s. However I made a mistake when building. This box is supposed to be tuned to 35 hz. However I made the port about an inch too wide so it is tuned quite a bit higher than 35. It peaks at 47 so I figure its tuned to around 42. I like the box being tuned where it is now for comps but I am wanting to create a simple plug to lower the tuning for daily driving.



What would be a good frequency to tune two 15 inch l5s to for daily driving? I was thinking 32 hz.

Once I decide on a set tuning could someone please tell me how wide the port on the box needs to be for that tuning?

Click to read more...

 

[aaron7114 10+ year member]

bump. Anyone?

 

[PowerNaudio 10+ year member]

i dont see the total depth of the enclosure or the second depth for the very back step so i cant tell how deep the enclosure actually is. can you add it to the drawing?

 

[aaron7114 10+ year member]

i dont see the total depth of the enclosure or the second depth for the very back step so i cant tell how deep the enclosure actually is. can you add it to the drawing?

I am pretty sure that the missing length is 13 inches.

 

[Boulderguy 10+ year member]

Sorry, 30 day retune policy on those, then it's a 25% restocking fee.

//content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[aaron7114 10+ year member]

The box is tuned to 35 hz. What would it be tuned to if I cut the port width down by half an inch?