Checkup on my design

[ChevelleMan73 10+ year member]

Hey guys it's me again. I was wondering if you guys would beable to check this design out, see if it's solid. I was worried about getting too much port noise, do you think ill have a problem with it? The vent is 2"x13.5"x26.5" The box if my calculations are correct is 3.06cf tuned to 27.6 hz. Let me know if this box will work with two Kicker Cvr10's I want to start cutting soon so a quick response would be greatly appreciated.

Stupid attachment manager makes all my pics look like s**t so here are the dimensions.

Top and Bottom - 30x17.75"

left side - 17.75"x13.5

baffle - 27.25"x13.5

right side - 17"x13.5

Back - 28.5"x13.5

Port 1 - 14.25"x13.5

Port 2 - 8.5"x13.5

Thanks for your help guys.

Joel

Click to read more...

 

[hofulstrof 10+ year member]

add a bit of bracing and it should be good to go

 

[ChevelleMan73 10+ year member]

Do I really need bracing? Won't it screw with the box volume along with the tuning?

 

[hofulstrof 10+ year member]

yes you should add at least one piece from the middle of the front baffle to the back of the box.a bit yes. you just need to find out how much volume your braces will displace and accout for it by making the box slightly larger