Check these box specs

[da box king 10+ year member]

This is all I could get out of the dimensions I have. Its for 2 new 12" RE XXX, off 4k.

I used re box calculator and it was off, compared to my box program.

My box programs specs were like this:

Inner box dim: 14.5" H x 33" W x 20.5" D =5.667 cu ft

Total dis of both subs: .48 cu ft

Port Dimensions: 14.5" H x 4.5"W x 27" L

Gives me a tuning of 36.16 hz.

Box will also be double baffled so take out another .179 cu ft

also 2 dowel braces (which dont equal to much)

I ended up with

3.99 ct net

65.25 sq in of port area

27" of effective port length

16.34 sq in of port are per cube

2.00 cubes/sub

36.16 hz

Techs at RE said 2-2.2 would be great for the subs...

what ya think?

Click to read more...

 

[audioarsonal 10+ year member]

Port lenght might be a little long but other then that looks good.

 

[da box king 10+ year member]

thats what I was thinking. re's site seemed alot shorter

 

[da box king 10+ year member]

bump

 

[Skip01 5,000+ posts]

RE site sucks. Get JBLcamry to do a design and cutsheet

 

[iamamp3pimp 5,000+ posts]

i think its a bit small and tunes really high

i wouldnt tune those subs over 30.....,

 

[da box king 10+ year member]

i think its a bit small and tunes really high
i wouldnt tune those subs over 30.....,

the fvckers at re keep sayin tune around 35 hz. They even said you wont hear anything lower than 28hz, at that point in the conversation I knew I should hang up.

The guy with the system will not get this metered, but he wan't it loud to the ear. So I'm guessing something murdering the lows would be his liking