Reply to thread

Message

<blockquote data-quote="da box king" data-source="post: 6070722" data-attributes="member: 587144">This is all I could get out of the dimensions I have. Its for 2 new 12&quot; RE XXX, off 4k.I used re box calculator and it was off, compared to my box program.My box programs specs were like this:Inner box dim: 14.5&quot; H x 33&quot; W x 20.5&quot; D =5.667 cu ftTotal dis of both subs: .48 cu ftPort Dimensions: 14.5&quot; H x 4.5&quot;W x 27&quot; LGives me a tuning of 36.16 hz.Box will also be double baffled so take out another .179 cu ftalso 2 dowel braces (which dont equal to much)I ended up with3.99 ct net65.25 sq in of port area27&quot; of effective port length16.34 sq in of port are per cube2.00 cubes/sub36.16 hzTechs at RE said 2-2.2 would be great for the subs...what ya think?</blockquote>

[QUOTE="da box king, post: 6070722, member: 587144"] This is all I could get out of the dimensions I have. Its for 2 new 12" RE XXX, off 4k. I used re box calculator and it was off, compared to my box program. My box programs specs were like this: Inner box dim: 14.5" H x 33" W x 20.5" D =5.667 cu ft Total dis of both subs: .48 cu ft Port Dimensions: 14.5" H x 4.5"W x 27" L Gives me a tuning of 36.16 hz. Box will also be double baffled so take out another .179 cu ft also 2 dowel braces (which dont equal to much) I ended up with 3.99 ct net 65.25 sq in of port area 27" of effective port length 16.34 sq in of port are per cube 2.00 cubes/sub 36.16 hz Techs at RE said 2-2.2 would be great for the subs... what ya think? [/QUOTE]

Verification