Check out this aero design...

[tapout383 10+ year member]

LMK what you guys think on how it would sound on a Fi BTL should be:

32"w x 16.5"h x 28"d

6.782 cubes total

6 cubes of airspace after sub and port displacement

ports will be flared...tuned to around 38hz

Click to read more...

 

[bonesninja 5,000+ posts]

looks fun

 

[tapout383 10+ year member]

looks fun

wat ya mean

 

[IDSkoT 5,000+ posts]

wat ya mean

Looks.

Fun.

 

[tapout383 10+ year member]

Looks.Fun.

//content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif

 

[bonesninja 5,000+ posts]

looks loud...hows that

 

[tapout383 10+ year member]

looks loud...hows that

sounds good //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[tapout383 10+ year member]

or should i do 3 4''s?

 

[bonesninja 5,000+ posts]

2 6"s = 56 in or so 3 4"s = 37 and some change

 

[tapout383 10+ year member]

2 6"s = 56 in or so 3 4"s = 37 and some change

thanks man, btw the ones for $37 from parts express how do i get the 15 inch tube i need it says i can create a port up to 17'' long...would i use pvc at a local lowes or do the cut it or what?? thanks again

 

[bonesninja 5,000+ posts]

thanks man, btw the ones for $37 from parts express how do i get the 15 inch tube i need it says i can create a port up to 17'' long...would i use pvc at a local lowes or do the cut it or what?? thanks again

that middle section comes with it

 

[tapout383 10+ year member]

that middle section comes with it

so the middle is 17'' long i just cut it to what i need?

 

[Unfortunate 10+ year member]

so the middle is 17'' long i just cut it to what i need?

exactly. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Unfortunate 10+ year member]

sorry for threadjack but using http://www.psp-inc.com/

Volume of Box in Cubic Feet is before or after displacements???

 

[Notloud00 10+ year member]

isnt it better to have the ports as close together as possible and the sub as far away from the ports as possible?