can somone design a box real quick?

[Bassman999 10+ year member]

vent going up and down drivers side

 

[terra 5,000+ posts]

I'd go with that.

 

[TnT_Sounds 10+ year member]

Is there a way i can make it 2 seperate boxes and bolt them on top of eachother in the car?

 

[Bassman999 10+ year member]

2 boxes each one is 17.5x49x20.25 port 7x10x18 tuned to 32.5hz

 

[TnT_Sounds 10+ year member]

Sounds **** near what I was looking for. Thank you

 

[Bassman999 10+ year member]

sure

port might have to change to a taller thinner one like 16x4.5 using side wall as port or lessen port area to shorten length

 

[Bassman999 10+ year member]

port will be an L-shape 16 tall and 4.5 wide per box --port Length (1) 14.25" port Length (2) 1.25"

that will make an effective length of 20" tuned to 32.14 hz

 

[TnT_Sounds 10+ year member]

Ah ok... Kinda confusing but I might be able to figure it out

Thanks again

 

[Bassman999 10+ year member]

http://reaudio.com/speaker_box/LPort_Box_Calc.html

like this except it doesnt take into account the bracing or sub displacement, so dont worry about the tuning on it being different

 

[TnT_Sounds 10+ year member]

Ah ok.. Just put the bracing sparaticaly throughout?

 

[TnT_Sounds 10+ year member]

A design would really help out

 

[Bassman999 10+ year member]

im not too good with sketchup

ill try to do one

 

[Bassman999 10+ year member]

can anyone tell me how to put a sketchup drawing on here? thanx

 

[Bassman999 10+ year member]

I saved it as an excel worksheet. Can you open that TnT? if so i can email it to you or something unless someone tells me how to post it here.