Can Someone Please Tell Me What This Box is Tuned to?

[sml238 10+ year member]

http://www.sonicelectronix.com/item_7566_Sonic+Sub+Box-+1SL12-1.0+-BLACK+CARPET-.html

I was gonna get this box and cut another hole for a 12" gtr to use with my boston g5.

G5 calls for a box tuned to 35hz. Will this box be good for the g5 and the gtr if i cut the hole?

Click to read more...

 

[IDSkoT 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

This is a sealed box.

Not a ported box.

Thus it's not "tuned" to any frequency....

 

[Trey803 5,000+ posts]

it is tuned to 15 anti-hertz....since it is sealed everything is anti-hertz and 1+14=15

 

[HlorridiXplorer 10+ year member]

Your going to cut another hole in that box and have 2 12" sharing that same box?

Looking at those dimensions i'd be amazed if you fit 2 subs in there and even if you did each sub would have like a .5 cu ft to breath BEFORE displacement . . . Not good.

 

[sml238 10+ year member]

Your going to cut another hole in that box and have 2 12" sharing that same box?
Looking at those dimensions i'd be amazed if you fit 2 subs in there and even if you did each sub would have like a .5 cu ft to breath BEFORE displacement . . . Not good.

no its a radiator sub...it doesnt require any power it runs off of the pressure from the other sub. look at boston g5 and gtr. the g5 is the sub and the gtr is the radiator.

but i found the exact setup i want all put together by boston.

but can someone tell me if dealercostcaraudio.com is legit?

 

[BobbyDD 10+ year member]

You adjust the gtr to change the tuning. Just build a 1 cubic foot box and be done with it.

 

[HlorridiXplorer 10+ year member]

no its a radiator sub...it doesnt require any power it runs off of the pressure from the other sub. look at boston g5 and gtr. the g5 is the sub and the gtr is the radiator.
but i found the exact setup i want all put together by boston.

but can someone tell me if dealercostcaraudio.com is legit?

interesting, but dealercostcaraudio.com is listed as one of the top 10 sites to buy from on ca.com but i don't have any personal experience with them. It doesn't cost to much to get the materials to build your own box. could prolly be done for less than 30 dollars if you have the tools. Or there's people on here that could build you a box for pretty cheap since it'll be so small.