Build me a system!!

  • 6
    Participant count
  • Participant list

Lowflyin
10+ year member

Sit on my face, B*tch
1,149
0
FU JOSE, PA
I have 1000 to spend for a system.(wires, box, sub, amp, front)

I was originally thinking either a HDC318 or a custom 18 from SPLAUDIO on a Ap30001d or ap18001d.

I want an 18 for sure though because I'm building this for a daily ground pounder, doesn't need to meter well and i will prolly tune it around 28-32 hz.

All of this is going in an extended cab s10/sonoma. Any reccomendations?

 
sounds like u have a good plan for that amount of money. you have power wire? extra battery? have you dont the big 3?

i would do sub foward and port to the side al below the window line. have RAM_Designs hook you up with a design, very nice guy

 
No power wire, if I go with the 1800 amp it only accepts 4 guage so that would be a lot cheaper plus the cost of the amp is 100 less than the 30001d. If I go with the 30001d I will need 1/0 which is a lot more than 4 guage so I'm not sure where to go from there. Would it be worth getting the 3000 or will the 1800 be plenty? I pretty much just want something that sounds decent, gets louder than my 2 cvr 15s i had, and demos well.

optima red top under the hood and going to do the big 3 in 1/0.

With 1800 watts, will a H/o alt be necessary, what alternator comes stock in a s10/sonoma 4.3 v6?

and rams designs are only a buck arent they? if so i will do that for sure

EDIT:

No blow through and I am pretty set on a single sub set up, pretty set on an 18 also...

EDIT: X2

Was also thinking of going 4th order with an 18, not sure if ill have the space though....

 
no, bucks designs are only a buck, lol... but he does good work. so does ram, and pro rabbit.

as far as the amp, it really depends on the sub you choose, and so does the wiring

 
$279 for the 18HDC318 Copper Coil Subwoofer

amp $429

AQ2200D Amplifier

then 200 bucks for a solid extra battery (i have some //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif )

that leaves about 100 for materials for the box

Ya but what about wiress.... The 200$ I save by getting an AP will pay for them unfortunately.. I do want an aq2200 though.

I figure i will run it like that with an AP and then when i get enough ill buy the AQ and sell the AP..

 
what year s10,i also have a s10 mines the loudest street truck [no wall or cut thru] with 2 batts i can tell you almost any thing about s 10s.also i may have an alt for you

 
I would get a new 18 but not a new amp, the prices are crazy. Either get a used AQ or get an AP, you will save quite a bit
i wouldnt get new anything because of prices but some ppl are differant, i offered up new because some of the newbies are scared of used but to each is own lol. OP you can get a AP 3000.1 for 300 on ebay. do that rather than the 1800. with the big 3 and a redtop, u can buy a nice sprinter batttery off me and it will set you on power for sure! PM me if ya want any help or ideas on the build

 
i wouldnt get new anything because of prices but some ppl are differant, i offered up new because some of the newbies are scared of used but to each is own lol. OP you can get a AP 3000.1 for 300 on ebay. do that rather than the 1800. with the big 3 and a redtop, u can buy a nice sprinter batttery off me and it will set you on power for sure! PM me if ya want any help or ideas on the build
Alternatively you can get 2 AP1500's for like $270 which is cheaper than the AP3k and gives you some more wiring options too

 
i wouldnt get new anything because of prices but some ppl are differant, i offered up new because some of the newbies are scared of used but to each is own lol. OP you can get a AP 3000.1 for 300 on ebay. do that rather than the 1800. with the big 3 and a redtop, u can buy a nice sprinter batttery off me and it will set you on power for sure! PM me if ya want any help or ideas on the build
i agree with you .i'd get a used aq over a new ap anyday.just a way better amp in my opinion

 
Alternatively you can get 2 AP1500's for like $270 which is cheaper than the AP3k and gives you some more wiring options too
I thought this also until someone brought up distro block, rcas and all that and I figure after that the ap3k is cheaper...

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
924
For sub, I recommend going true infinite baffle. You get to keep just about all of your trunk space AND sound great doing it (if you do it right.)...
7
2K
https://www.youtube.com/@therealmatty_s/videos
0
507
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
872

About this thread

Lowflyin

10+ year member
Sit on my face, B*tch
Thread starter
Lowflyin
Joined
Location
FU JOSE, PA
Start date
Participants
Who Replied
Replies
18
Views
1,681
Last reply date
Last reply from
Lowflyin
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top