Brahma Subwoofer Repair?

[killcrap 10+ year member]

i purchased an adire audio brahma from Acoustic Visions 12" D2OHM. in Feburary 2007 one day the speaker stopped working, i didnt over power it. i powered it using a ED Nine.2x. when i pushed on the speaker cone, the speaker started to make sound again, i contaced Acoustic Visions, and told me i am SOL as Adire has gone under. Kyle told me to get it repaired elsewere or attempt to fix it my self. i took off the cone, and tried re-soldering the bad voice coil, but it still doesnt work. the resistance of the voice coil goes crazy when at a stand still, but goes to 1.7ohms right when the connection is good again, is there anywhere in the Orange County area that can fix this sub.

Click to read more...

 

[mjf 10+ year member]

http://www.ficaraudio.com

send scott an email he'll take care of you.

 

[IgnoreMe 5,000+ posts]

i believe Fi can do a recone on the brahma's^^^

 

[negative3five 10+ year member]

Thats a MK3 or 4 prob I think they have 2.5 inch voice coils they might not be able to do it, I think they only stock 3 inch voice coils.

 

[IgnoreMe 5,000+ posts]

Thats a MK3 or 4 prob I think they have 2.5 inch voice coils they might not be able to do it, I think they only stock 3 inch voice coils.

true. im not familiar with the brahma generations and differences between them, but yes, it has to be a 3" coil.

 

[killcrap 10+ year member]

its a MKIV brahma, i'll contact him, any other people want to chime in?

 

[dB Dom 10+ year member]

Yea its a not a 3 inch coil on the MK4

 

[killcrap 10+ year member]

Yea its a not a 3 inch coil on the MK4

thanks Dom, i dont think you remeber me, but i was that one guy with the 1995 Maxima, i was in your brakes Class at UTI. remebered you had XXX's and i had a MK1 Brahma. where you working now bro?