box

[jellyfish420 10+ year member]

make sure you know the angle of your seat too.

i've already built a couple boxes that fit against the seat, so that angle isn't a problem...IIRC its about 16...

 

[saywhat? 5,000+ posts]

wtf is IIRC?

 

[req 5,000+ posts]

if i recall correctly //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[jellyfish420 10+ year member]

wtf is IIRC?

WHAT THE FU(K is wtf?//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[jellyfish420 10+ year member]

ok...i'm ready for sketchup here is all the measurements. its 37" wide(external) and there will be a 3/4 inch brace that runs down the center of the port and stops at the end. if i forgot something or something looks wrong PLEASE tell me:blush:

 

[jellyfish420 10+ year member]

so i guess noones gonna sketch it....//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

i guess i'll just have to wait till i build it:up2somet:

 

[bcarpenterfhl 10+ year member]

uhh i woke up 20 minutes ago hold up. i'll get right on it.

 

[bcarpenterfhl 10+ year member]

hey the dimensions you posted have to be wrong. its not working out. maybe its just me.

 

[req 5,000+ posts]

its prolly wrong. its very hard to sketch (on paper) somthing like that with human error.

thats why i always start with cad to begin with. jelly, PM me and ill get in touch with you about somthing.

 

[jellyfish420 10+ year member]

hey the dimensions you posted have to be wrong. its not working out. maybe its just me.

they probably are. i didn't sit down and actually calculate the numbers. i just used a ruler being 1/4 scale i had to round numbers to the nearest 1/4 inch, give or take the width of the pencil line....which in my case is up to 1/2" (scale) in some spots:blush:

 

[req 5,000+ posts]

hey the dimensions you posted have to be wrong. its not working out. maybe its just me.

surprisingly, he was almost 100% accurate, but he calculated the volume wrong. and the 'baffle' where the subs are gonna be mounted was like 15.93" instead of 16 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

like i said, he was VERY accurate. and thats hard to do with pencil and paper. props jelly.

if the box is 37" wide, its just about 5.9 cubes. the tuning is closer to 25hz.

everything is just about dead on. angles are exactly as in your picture. if you want, i can dimension all the angles for you so you know how you have to cut them too.

and if i knew how - i could extrude this shape to make a '3d box' but i forget how that works. so feck it. //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

 

[Rawr-DQ 10+ year member]

What programs do you guys use, I'd like to buy a copy.

 

[bcarpenterfhl 10+ year member]

i just use the one i wrote for the ti-83 graphing calc. bbp6 is useless when you have an unstraight port.

 

[Rawr-DQ 10+ year member]

bass box pro 6?

what do you use to do the 3d layouts?

 

[bcarpenterfhl 10+ year member]

surprisingly, he was almost 100% accurate, but he calculated the volume wrong. and the 'baffle' where the subs are gonna be mounted was like 15.93" instead of 16 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
like i said, he was VERY accurate. and thats hard to do with pencil and paper. props jelly.

if the box is 37" wide, its just about 5.9 cubes. the tuning is closer to 25hz.

everything is just about dead on. angles are exactly as in your picture. if you want, i can dimension all the angles for you so you know how you have to cut them too.

and if i knew how - i could extrude this shape to make a '3d box' but i forget how that works. so feck it. //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

.
shit your right. i put in 130 degrees instead of 150. god dam spring break //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif