Box Question

[plazman 10+ year member]

heres what im talking about with the cone covering the hole

could i bolt through that? which means i would be tear a piece off.

 

[BASS OUTLAW 10+ year member]

shiet, why is it that way ?? give it back,

am afraid that when u bold through that, the cone will come off after a while,

because as u can c , that is where is cone glued to the basket.

 

[plazman 10+ year member]

Bass, i got some problems.

Max width is 33 inches.

height is gonna be 15 inches

i gotta figure out the rest.

 

[plazman 10+ year member]

here the whole box in 3D
the green one is the port

Bass, last design, i promise.

Changes

Max width = 33 Inches

Bottom width= 30 inches

height= 15 inches

largest depth, 21 inches

smallest depth 13 inches

What ever it comes out to, tuned to 32hz

ports on top if possible

Thanks a Mill! Last request

 

[BASS OUTLAW 10+ year member]

Bass, last design, i promise.
Changes

Max width = 33 Inches

Bottom width= 30 inches

height= 15 inches

largest depth, 21 inches

smallest depth 13 inches

What ever it comes out to, tuned to 32hz

ports on top if possible

Thanks a Mill! Last request

lol ok, but not today, i feel sleepy, but i will do it 4 ya //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif later //content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif

 

[plazman 10+ year member]

lol ok, but not today, i feel sleepy, but i will do it 4 ya //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif later //content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif

thank bro!

LONG LIVE BASS!

 

[BASS OUTLAW 10+ year member]

BOX DIMEN. (external measurements) 3/4 MDF

Width= 32.1"

Hight= 16.5"

Depth= 15.56"

PORT DIMEN.

Port hight= 15.75"

Port width= 3"

PORT LENGHT= 33.3"

tunning frequency 32 hz

net internal vol.= 3.5 cuft.

 

[plazman 10+ year member]

is the rear slanted?

bass i dont get it... the port is going to be longer than the box? its going to stick out?

bass.. lets say i increase the dimensions,

for every inch, how much do i increase the port dimensions?

 

[BASS OUTLAW 10+ year member]

the back is not slanted, i dont know how many degree u want it, and no need for it

2nd thing the port is not too long, will draw u a diagram tommorow //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[plazman 10+ year member]

the back is not slanted, i dont know how many degree u want it, and no need for it2nd thing the port is not too long, will draw u a diagram tommorow //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

its ok bass... i figured it out. No need for the diagram.

Thanks bro! You've been really helpful!

Long live bass!

Rich

 

[BASS OUTLAW 10+ year member]

dont forget, dont change the port width at the bend //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif 3" all the way,

good luck

 

[plazman 10+ year member]

Got it! Thanks..

Bass, do u know anything about distro. blocks?

 

[BASS OUTLAW 10+ year member]

Got it! Thanks..
Bass, do u know anything about distro. blocks?

what about them ??

they r used when u have to amps,

to distibute the main power supply into 2 or 3 or 4 other power supply for a number of amps.

used if u got two amps,

 

[plazman 10+ year member]

yea i know what they do... but i cant find 1 that suits me.

4ga input, 4 and 8 output.

i ordered the knuknoceptz 1.. but it doesnt work

 

[BASS OUTLAW 10+ year member]

no sorry, i cant really help u in this one //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i dont know much about where to find and stuff,

and yet again , u have to check ot the IRC room, many ppl, and they know their shit,

u will get a fast reply on that . //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif