Box for two 10 W3 V1's

[miker 5,000+ posts]

Like the tittle says...

If anyone has a good design for these subs...

Not exactly sure what dimensions I would need... I can only find stuff for the V2's, though I'm not sure if that makes a difference...

Also I can't get sketch up to work...

Click to read more...

 

[hoxie08 5,000+ posts]

maybe check out the discontinued section on jl.com? I know when i was lookin up stuff for my old w0 I had to use that part and find the year model and whatnot.

 

[miker 5,000+ posts]

maybe check out the discontinued section on jl.com? I know when i was lookin up stuff for my old w0 I had to use that part and find the year model and whatnot.

I looked, but no cigar... Unless I'm just looking wrong...

 

[JDBuilder 10+ year member]

The spec sheets I have for the 10W3v.1 is .625^3ft for sealed and 1.15-1.25^3ft ported @32Hz. What are you looking to do, ported or sealed? I can plot out a design for you if you like. Just let me know if I can help.

 

[miker 5,000+ posts]

Ported.

Something 14" or less high, width is no problem for two 10"s... depth shouldn't be either.

Nothing to fancy.

Ported.

Thanks!

 

[80INCHES 5,000+ posts]

Like the tittle says...
If anyone has a good design for these subs...

Not exactly sure what dimensions I would need... I can only find stuff for the V2's, though I'm not sure if that makes a difference...

Also I can't get sketch up to work...

2.5 cubes tuned to 32hz with 35 square inch port

if u have the power cuz they can take 500-600watts all day long

u can slap them in a 4th order bandpass...they do very well in them

just have each sub in .68cubes sealed playing into a common 1.3cubes ported area with 50square inches of port 14 inches long

80

 

[miker 5,000+ posts]

2.5 cubes tuned to 32hz with 35 square inch port if u have the power cuz they can take 500-600watts all day long

u can slap them in a 4th order bandpass...they do very well in them

just have each sub in .68cubes sealed playing into a common 1.3cubes ported area with 50square inches of port 14 inches long

80

I think I will be playing them at 1200rms.

I don't know very much about boxes so please...

4th order bandpass?

35sq in port? how long would it be?

Thanks.

 

[JDBuilder 10+ year member]

Try this design. Now this is useing 3/4"MDF and .25^3ft for sub and bracing displacement, outside Dim. 12"H x 28"W x 22"D, 3.301^3ft gross vol. Slot port, 10.5" x 2.75" x 27.9"Long@32Hz. After all displacement, 2.543^3ft net box vol. This will do the job very, very, well. If you have any questions, feel free to contact me.

Have Fun.