Box for RE XXX?

Status
Not open for further replies.
Well i was told that there is no way i can fit a ported box thats built to manufacture spec in my trunk (2.1 cu ft net), so now i dunno what i am gonna do. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif These are my trunk specs
28" long(left to right)

12" wide(front to rear)

17" deep(bottom to top)
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

that would be 17"H x 28"W x 12"D 600 posts and you dont even know howto say measurements.

 
Z2.jpg


Z1.jpg


That's 2.3 cubes sealed and you can tell I'm only using 2/3 of the available space. Build correctly and maximizing your space, you have more than enough available space.

 
Wow this board is really turning into a flame fest. Its funny how some people/threads like this can go on and on, yet others get locked immediately. Some people can act like complete a-holes, on purpose, for no other reason, and not get warned, deleted, etc. Im rapidly losing interest in coming to a board with so many members that act like this.

Yes Ive followed ls1pimp's posts from the beginning. yes I know he doesn't know alot and doesn't take alot of people's advice, but I also know he does NOT deserve the relentless assault from a few of you. I have to wonder, if he'd ditched a XXX for an Rl-p, all other things in the situation being the same, would all of you still be bashng him so hard rather than answering his questions. Seriously, some of you spend more time trying to beat him down for asking some question than just answering. (use the search, you're too ignorant to understand anyway, why not try the Rl-p again, blah blah blah).

IMO those of you in this thread not trying to help should simply leave it. Its funny how many of you were so quick to run to mrray's defense, to keep a civil thread/review, yet you waste no opportunity to insult him in huge fonts. Get over it, go on with your lives, Im sure ls1 wants to. At some point ls1pimp is no longer the idiot or ahole, the rest of you guys ARE. That point has been crossed.

ls1pimp, RE recommends ported turned to 28hz as their SQL enclosure. The reson for the low tuning is for SQ, the fact its ported gives it the SPL factor. An all out SQ install would use the sealed enclosure (contrary to popular belief XXX's work great sealed and sound awesome *shrug* everyone seems to think ported or nothin these days... their loss). An all out SPL setup would use a high-tuned ported enclosure. The compromise between the two (SQL) would be a ported system, but that is tuned low for SQ. Hope that makes sense. IMO if you are happy with the output, I dont see the need to change. Do you listen to it at full blast regularly? If not, don't bother. You will lose a bit of SQ for the sake of a little output you wouldn't be using except rarely anyway. But if you listen to it at full alot (and wish it had more), then yeah Id say try porting with a low tuning. Good luck.

 
The sad part about your post....you havent left //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

His questions have been answered many, many times.

Now I commence to break down your post...

Wow this board is really turning into a flame fest. Its funny how some people/threads like this can go on and on, yet others get locked immediately. Some people can act like complete a-holes, on purpose, for no other reason, and not get warned, deleted, etc. Im rapidly losing interest in coming to a board with so many members that act like this.
You dont like it then leave.

Yes Ive followed ls1pimp's posts from the beginning. yes I know he doesn't know alot and doesn't take alot of people's advice, but I also know he does NOT deserve the relentless assault from a few of you.
I agree that he doesnt know a lot. He has been told by many people the answers to his questions, he chooses to not listen. He has post the same questions on here, SSA, and SIN. He received all the SAME answers, yet he keeps asking them again.

I have to wonder, if he'd ditched a XXX for an Rl-p, all other things in the situation being the same, would all of you still be bashng him so hard rather than answering his questions. Seriously, some of you spend more time trying to beat him down for asking some question than just answering. (use the search, you're too ignorant to understand anyway, why not try the Rl-p again, blah blah blah).
Oh drop it. This is in no way about that. There are RE and SS fanboys. I would be willing to bet that the same is true if he had decided to go for the RL-P over the XXX. Who cares about that. I am NOT in any was biast, so I will say what I think about this.

The RE folks bashed Mrray in his review, they told him to add power, he did. They told him to make the box bigger, he did. They told him to port it, he did.

LS1's post, the RE folks bashed the SS folks when they told/asked him to port the RL-P, did he....no. He made comments along the lines of..."OMG THIS XXX KICKS THE RL-Ps ***!!!! IT MAKES MY HAIR MOVE, IT MAKES MY CHEST HURT!!!!!

now...BOTH PARTIES ARE IN THE WRONG HERE.

IMO those of you in this thread not trying to help should simply leave it. Its funny how many of you were so quick to run to mrray's defense, to keep a civil thread/review, yet you waste no opportunity to insult him in huge fonts. Get over it, go on with your lives, Im sure ls1 wants to. At some point ls1pimp is no longer the idiot or ahole, the rest of you guys ARE. That point has been crossed.
Best part about this section in your post....your adding flame to the fire. People will flame, such is life. You have no control. When you post things like this it makes other lash back.

ls1pimp, RE recommends ported turned to 28hz as their SQL enclosure. The reson for the low tuning is for SQ, the fact it sported gives it the SPL factor. An all out SQ install would use the sealed enclosure (contrary to popular belief XXX's work great sealed and sound awesome *shrug* everyone seems to think ported or nothin these days... their loss). An all out SPL setup would use a high-tuned ported enclosure. The compromise between the two (SQL) would be a ported system, but that is tuned low for SQ. Hope that makes sense. IMO if you are happy with the output, I dont see the need to change. Do you listen to it at full blast regularly? If not, don't bother. You will lose a bit of SQ for the sake of a little output you wouldn't be using except rarely anyway. But if you listen to it at full alot (and wish it had more), then yeah Id say try porting with a low tuning. Good luck.
He has been told this countless times. I expect another thread or post with him asking you why he should port it even though you just explained it to him. Then after that I see him posting it in SIN and SSA just to get the same answers again...

I AM DONE!

-Justin

 
The sad part about your post....you havent left //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

His questions have been answered many, many times.

Now I commence to break down your post...

You dont like it then leave.

I agree that he doesnt know a lot. He has been told by many people the answers to his questions, he chooses to not listen. He has post the same questions on here, SSA, and SIN. He received all the SAME answers, yet he keeps asking them again.

Oh drop it. This is in no way about that. There are RE and SS fanboys. I would be willing to bet that the same is true if he had decided to go for the RL-P over the XXX. Who cares about that. I am NOT in any was biast, so I will say what I think about this.

The RE folks bashed Mrray in his review, they told him to add power, he did. They told him to make the box bigger, he did. They told him to port it, he did.

LS1's post, the RE folks bashed the SS folks when they told/asked him to port the RL-P, did he....no. He made comments along the lines of..."OMG THIS XXX KICKS THE RL-Ps ***!!!! IT MAKES MY HAIR MOVE, IT MAKES MY CHEST HURT!!!!!

now...BOTH PARTIES ARE IN THE WRONG HERE.

Best part about this section in your post....your adding flame to the fire. People will flame, such is life. You have no control. When you post things like this it makes other lash back.

He has been told this countless times. I expect another thread or post with him asking you why he should port it even though you just explained it to him. Then after that I see him posting it in SIN and SSA just to get the same answers again...

I AM DONE!

-Justin

I'm glad I didn't reply, cause I wouldn't have been able to explain it that well.

Things would be different if he wasn't on 3 forums getting the same answers to the same questions in a ton of different thread, atleast for me it would.

(Yes I know, no-one cares about me //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif )

 
Jntar has left the building,

 

the 9:30 show is completely different from the 10:30 show, TRY THE VEAL

 

 

 

 

 

j/k, this is not worth it, just a forum people, if he does not want to accept the help and guidance he has gotten all over the net that is not our probelm,

 
jntar, long post, filled with nothing but excuses why it's alright to treat ls1pimp like a second class member. Your large fonts do not change that in any way. If anyone here is tired if this guy's questions... here's a brilliant idea.... dont read them. Nobody forces anyone to read a post, and then flame the guy for asking. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

And I find it ridiculous you consider me calling out people for flaming, as a flame. Someone stands up for the guy, and you act like its nothing more than fuel to the fire. If you want to discuss someone instigating, I would be looking at the person who feels it necessary to get their point across in as large of fonts as possible. You viewpoint is very skewed.

And I'll leave if and or when I am ready, I was not asking for your permission. I was here long before you came to this board, chances are I'll still be around once you've left. Thanks for the invitation tho. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Next.

 
And you're a fool if you think this isn't about the stupid RE vs SS arguement. If it wasn't, people would be satisfied ls1pimp made a change that made HIM happy, rather than the people wanting him to change the box to fit the SS sub. I have nothing against the Rl-p (nor mrray or his review), think its a great sub, but I have to question why some people seem so angry he switched to a XXX and was HAPPY, rather than build a new box for the Rl-p. He switched, he was happy with the results, he sold the Rl-p to some other SS fan. Everyone is happy, except the haters.

 
Im running into some problems with the box. In my trunk i have t-top holders, i can either buidl a box in between the space, or build a box that starts above them and uses the whole length of my trunk. Here are the measurements.

small space ( in between t-top holders)

H = 19 (left to right)

D= 20 (top to bottom)

W= 13 (front to back)

big space

H = 37 (left to right)

D= 12 (top to bottom)

W= 13 (front to back)

here are pics so you can see what i mean.

http://www.lifeinwidescreen.com/siihp/trunk1.jpg

http://www.lifeinwidescreen.com/siihp/trunk2.jpg

http://www.lifeinwidescreen.com/siihp/trunk3.jpg

 
Im running into some problems with the box. In my trunk i have t-top holders, i can either buidl a box in between the space, or build a box that starts above them and uses the whole length of my trunk. Here are the measurements.
small space ( in between t-top holders)

H = 19 (left to right)

D= 20 (top to bottom)

W= 13 (front to back)

big space

H = 37 (left to right)

D= 12 (top to bottom)

W= 13 (front to back)

here are pics so you can see what i mean.

http://www.lifeinwidescreen.com/siihp/trunk1.jpg

http://www.lifeinwidescreen.com/siihp/trunk2.jpg

http://www.lifeinwidescreen.com/siihp/trunk3.jpg
h=height d=depth w=width I believe... but im a noob too //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif. I"m not gonna read all **** 6 pages too see what e1 has said cuz I'm sure there is a lot of BS. If I were you I'd do it to re specs... check the website. I belive 2 cubes and 29hz or something. Maybe you'd be happier with something like 2.5cubes at 32 hz. Anyhow use this calculator http://www.accelerator-pedal.com/ported-box.asp or see if someone will make you a design for a small fee. If those are the dimensions after MDF you should be able to fit one. I remember you said you have a hatch... what kind of car is it? Just trying to figure out why it can only be 13" tall. I prefer having the box more than like .5" bigger than the sub.

For the record i totally agree with you audio. I have only been here since november and have noticed a quickly changing trend. Maybe its just me but it seems more of the audio intelligent people are posting less and less //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif ..... However, 600+ posts in a month is totally not needed for questions about a few subs. At least in my opinion. When I was first here I did nothing but search.

 
h=height d=depth w=width I believe... but im a noob too //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif. I"m not gonna read all **** 6 pages too see what e1 has said cuz I'm sure there is a lot of BS. If I were you I'd do it to re specs... check the website. I belive 2 cubes and 29hz or something. Maybe you'd be happier with something like 2.5cubes at 32 hz. Anyhow use this calculator http://www.accelerator-pedal.com/ported-box.asp or see if someone will make you a design for a small fee. If those are the dimensions after MDF you should be able to fit one. I remember you said you have a hatch... what kind of car is it? Just trying to figure out why it can only be 13" tall. I prefer having the box more than like .5" bigger than the sub.For the record i totally agree with you audio. I have only been here since november and have noticed a quickly changing trend. Maybe its just me but it seems more of the audio intelligent people are posting less and less //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif ..... However, 600+ posts in a month is totally not needed for questions about a few subs. At least in my opinion. When I was first here I did nothing but search.

Its a ***** Am WS6.

 
i got next...

but i'll let this do my talking...

these subs sound sweet..they both keep up quite well with very little overhang. they are fun to watch and nice to listen too.

as to which has better sq..it's definitely a draw...u won't be disappointed with either one.

as to which plays lower, in this application, the rl-p wins hands down. my wife's exact words," it's (the xxx) doesn't go as low. the seats don't shake as much"....that was the opinion expressed by all three of us. so the rl-p wins here.

spl...while i don't have a meter...they were very close here. my wife couldn't tell a difference while ryan and myself both thought the xxx was louder as it went up in the frequencies. the xxx wins here, but not by much..of course a mic would be needed to tell the whole truth.


hmmmmmmm...seems as though i thought the xxx was louder, while the rl-p played lower and the sq was better even........misleading yet??

overall...it's a tossup. the lighter weight of the rl-p makes it easier to handle and it does play lower in this application. the xxx, due to power rating, should have the potential to get uite a bit louder and in this case seemed to be louder with the power on hand. the xxx might just need a bigger box in this case even though re recommends .8ft^3. it just doesn't reach real low sealed, even in 1.25ft^3.

yep...seems like i thought the xxx would have the potential to be quite a bit louder ( due to power rating) and a bigger box...definitely misleading....

if i had to pick a winner, it would be the rl-p. price, easier to handle and sq bieng a touch better due to the fact that it does play lower gives it the edge..in this application. more room, more power, the xxx is definitely a contender
well, i don't believe i picked the rl-p because it got louder...really misleading now...seems as though i considered quite a few things...not just spl...

all in all..both are excellent subs....budget and space are going to be the biggest considerations...lower budget or tighter confines..take the rl-p
little more money, more room and more power..take the xxx

yep...that looks famaliar...

btw, if someone wants to send me an amp that produces 1500 wrms or so at one ohm, i'd be more then happy to use it in both the ported box and sealed box applications. my 1500d does it at 2 ohm.....so i'm out..
hmmm...i was asking for morepower to make the re fans happy...

but to be fair to the fans of the xxx..i will be doing a vented test with 750wrms..and if my trade goes thru, a vented and sealed test at 1200...
the vented box will be built according to re specs.....i just don't want anyone saying that the enclosure isn't right...i'm going by re specs because they built the sub.

what's this?? a trade?? for more power?? and a new box??

also, i still don't believe doubling it's power would've helped in the lower freq's, which is where it lost to the rl-p...it didn't seem to suffer from 750wrms anywhere else, in fact it plays quite loud, every bit as loud, if not a lil louder, then the rl-p
the re guys never got this point...except on the low end, the xxx did great with 750wrms and 1.25ft^3..and was louder...

anyway..i just picked up a orion 2400d..so i can do 1200 @ 4 and 2400 @1
and it will be done...lol..both vented and sealed,,both subs..
uhoh..yep, it's a 2500d... and yep....

at 750 wrms, these subs are really close in this box. both get low, but not real loud. both move quite a bit and sound really nice at low to mid volumes. both produce a hollow noise at upper volumes...almost like they were both bottoming out. but i don't think they are...

what got me was there was no clear difference in output between the two. the xxx appeared teh louder of the two sealed, yet didn't seem to gain anything in this box. the rl-p wasn't far behind sealed, but is dead even ported. in reality, neither one was impressive with their output. i was kinda disappointed, but tuning and vehicle probably have more to do with this then anything.

sq wise, IMO, the rl-p is still the better sounding of the two. double kicks are crisper and the transistions were seamless. both subs exhibit very little overhang and keep up with the music effortlessly. the xxx does keep up in the rumble catagory this time! both subs could reach the lowlows, there was no distinct difference as in the sealed box.

again, both subs seemed to handle the power fine, but i'm not for sure what was causing the hollow sound. it could just be that the subs are reproducing the kick sound in the kick drum more accurately then i'm used too..lol...

again, i think the output of both subs kinda got me. they just seemed to be boring. nothing impressive, just there. i mean both were loud, but sealed box loud..again, i guess tuning had alot to do with that.

i don't think either sub really like this box. it just made both subs fall flat at the top. i don't know, but the two tens that are normally in there off that same power crush both of these subs output wise in this box. maybe it's the vehicle's transeit response, the tens are tuned to 38hz. either way...i think i'm building a different box..lol...and doing this again.

if i were to choose..i'd flip a coin. for while i think the rl-p is crisper, the xxx sounds just as good. but both subs disappointed in the output part.


yep..definitely misleading..i mean i say both subs sucked in this box...

same vehicle, same power (750wrms,still gotta run wire for the orion) same box ONLY i've slugged it to around 1.9ft^3 tuned to 34 hz and i must say WOW!
both subs love this box...both subs get loud(er) and i didn't really notice any loss on the bottom end.

the noises i heard, i've determined to just be the subs actually reproducing the kick in the kick drum. i stuck my ear up next to both and i heard the exact same "noise"..lol...

they are both extremely accurate subs....i can't wait to throw more power at them as they still aren't quite loud enough for me.

getting warmer..but hey, neither was loud enough...

where do i start? with the smaller, tuned higher box, both subs just sing. loud and low...it's almost a dead heat..except..
to me the rl-p is cleaner. each note is crisper, regardless of volume. it just stays clean, low and loud.

the xxx is the louder of the two. it tends to blend notes together, but makes up for it with good lows and great output.

one of my favorite tracks to play is Europe's "It's the final countdown"..the intro is kewl as hell...both subs shook the hell outa the truck...same with outkast's speakerboxx album intro..gets low and has some serious kickdrum type bass. both subs just knocked the hell outa me..lol...

in the end only a couple of things seperate these subs.

space. the rl-p is definitely the sub to get if space is at a premium. it can reproduce lows in sealed enviroments that the xxx just can't reach. space isn't a problem? get the xxx.

power. under 1000wrms, the rl-p is the better sub. over 1000wrms, i'd suggest the xxx. not that the rl-p had any trouble with 1200wrms, but it would have preferred it in a sealed box, or even smaller ported one. the xxx took a licking and kept on tickin..i'm going to throw the 2500wrms at it tomorrow.

budget. the rl-p is definitely the better bang for the buck. all the sq of the xxx and most of it's output. plus, it works great with less power and smaller enclosures...so all around it cna save u money.

overall, here are my final impressions...

xxx:

if money, space and power isn't a problem. this is a great subwoofer. it has the sq of the rl-p with the output of a spl sub. it can take gobs of power and sounds good doing it. it does want large sealed boxes and ported ones to get real low, but in the right box, with the right power, it does indeed get low and loud. it is a lil more picky concerning enclosures and it does like power. but it does indeed do a fine job with half it's rms..it just needs a larger box to do what it can do.

rl-p:

if space, power and money is at a premium, definitely this is the sub to buy. it does great in a variety of enclosures from small sealed to medium ported. gets low in all of them..real low. gets loud too, not quite the spl machine the xxx is, but it can hold it's own with the right box. it can take more then rated power wise, but i don't think it can compete overall with the xxx in that catagory. this its the better sounding of the two,IMO. the bass was crisper throughout the volume knob. it's a great sub at a great price.

now for those who don't want to read all of it..i stated the xxx had the sq of the rl-p with the added benefit of getting loud like an spl sub....and then went on to say the rl-p sounded better but couldn't keep upin the power department and wasn't the spl machine the xxx was....

SO JUST WHAT THE HELL WAS SO MISLEADING????

let's not forget i suggested the rl-p for under 1k and the xxx for over 1k....

but yeah, i'm misleading ppl....

sorry for the long *** post..but ya know, i did everything i could to make my comparision a good one. i'm not about to let a person come along and bash that by saying i mislead ppl, especially when he did nothing like i did, nothing....(hell, i even apologized to dave for my remarks after i cooled down)

i'm done with this thread....and with ls1pimp...he's retarded, period. audioholic, i still have nothing but respect for you. now if ppl still don't get the deal..fu(k 'em...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee //content.invisioncic.com/y282845/emoticons/peace.gif.2db28b618ed8d1964ebbe2f5021d2c39.gif

 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

About this thread

ls1pimp

10+ year member
CarAudio.com Elite
Thread starter
ls1pimp
Joined
Location
NJM
Start date
Participants
Who Replied
Replies
114
Views
5,157
Last reply date
Last reply from
denim
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top