Box for 4 L7s complete....

[xpl0it 10+ year member]

Its a hell of a lot closer than settin it by hear bro, an o-scope is the most accurate way but as long as you take it easy on the gain and set it properly you will be fine. If you keep blastin the gain and causing that light to come on your gonna end up frying your amp or clipping your subs to death. Read up the gain setting tutorial and you'll be fine.

My gain is on 1/4 or so right now.. My subs are wiring by each sub having a + and - from voice coils 1 and 2 connected by wire. Then, all +'s are connected and all -'s are connected and from the last subwoofer, a + and - goes to my speaker terminal. The speaker terminal has 1 + and 1 - go to the amps + and - (bridged). So total it's a 2 ohm load since they are all dual 4 ohm.

 

[MikeyB 5,000+ posts]

My gain is on 1/4 or so right now.. My subs are wiring by each sub having a + and - from voice coils 1 and 2 connected by wire. Then, all +'s are connected and all -'s are connected and from the last subwoofer, a + and - goes to my speaker terminal. The speaker terminal has 1 + and 1 - go to the amps + and - (bridged). So total it's a 2 ohm load since they are all dual 4 ohm.

Alright cool thats how it should be, btw its not bridged since thats a mono-block, it doenst matter which set of terminals its wired to, they just put in another set for ease of wiring. But everything is good there, so just read the gain setting tutorial and set your gain with a dmm and youll be fine bro.

 

[MikeyB 5,000+ posts]

FYI, when you do read how to set the gain, the voltage you will be looking for is going to be about ~87 AC volts.

 

[xpl0it 10+ year member]

My manual says it's bridging the 2 amps together...

 

[xpl0it 10+ year member]

I know the gain setting tutorial like the back of my hand

 

[MikeyB 5,000+ posts]

My manual says it's bridging the 2 amps together...

??? what two amps?

btw im on aim right now

 

[xpl0it 10+ year member]

??? what two amps?
btw im on aim right now

My gen xx-colossus has 2 amps built into one chassis.

 

[MikeyB 5,000+ posts]

My gen xx-colossus has 2 amps built into one chassis.

oh snap, i thought you were usin a different amp

 

[xpl0it 10+ year member]

Nope, the good ol 42 incher that barely fits in my SUV! lol

 

[jujumantb 10+ year member]

dmm?

turn the gain all the way up if you want to get full power out of your amp

 

[Fast1one 10+ year member]

dmm?
turn the gain all the way up if you want to get full power out of your amp

You bad //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Trying to make his amp blow up //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[xpl0it 10+ year member]

Yeah... I was just about to go try that too:naughty:

 

[PV Audio 5,000+ posts]

I'm in carmel.... around 96th street and keystone.

LOL you shitting me? Like where all the car dealerships and shit are? I'm over there like every day (Tom Wood Subaru is teh shit).

 

[xpl0it 10+ year member]

Yeah man, really close to there. I live in Kingswood, it's off grey road in between 106th and 116th. I'm like a couple minutes away. Maybe you could help me with my amplifier issues.

 

[xpl0it 10+ year member]

Oh, and my friend's dad, Mr. Peters, works there at that Tom Wood Subaru. I dunno if you know him or not...