box design help

[Big Reazon 10+ year member]

Here is what I have 2 10 fi audio Q's. I want to build 2 seperate boxes. I am using 3/4 mdf wood. I want to port it to 32 hertz. My measurement are the biggest out side measurements possible. My max height is 11.5 inches. My max width is 17. And my max depth is 24. I want good bass not a dissorted box. Is this possible. This leaves a gross of about 2.7 cubic feet per box. The box also has to have sthe sub and the port on the face of the box. Help would be appreciated I tried to draw it out but I am only 16 and i think I got a gray hair trying to figure this out.//content.invisioncic.com/y282845/emoticons/fro.gif.c695f1f814b01c4ad99fe7f8cccadd29.gif

Click to read more...

 

[kurtdirt1 10+ year member]

Here is what I have 2 10 fi audio Q's. I want to build 2 seperate boxes. I am using 3/4 mdf wood. I want to port it to 32 hertz. My measurement are the biggest out side measurements possible. My max height is 11.5 inches. My max width is 17. And my max depth is 24. I want good bass not a dissorted box. Is this possible. This leaves a gross of about 2.7 cubic feet per box. The box also has to have sthe sub and the port on the face of the box. Help would be appreciated I tried to draw it out but I am only 16 and i think I got a gray hair trying to figure this out.//content.invisioncic.com/y282845/emoticons/fro.gif.c695f1f814b01c4ad99fe7f8cccadd29.gif

Try this out man... http://reaudio.com/speaker_box/LPort_Box_Calc.html You don't have much space to work with...Good luck with the tuning and correct box space man!

Kurt

 

[kurtdirt1 10+ year member]

Just put in your dimensions and tweak it to whatever you want....

Kurt

 

[Big Reazon 10+ year member]

Will I be able to get good sound though. I could get more space but it would have to indent up in the middle to clear the 2.5" tall by 9" drive shaft hump. So the max height over the shaft would be 8" I was Trying to design a box and put the port there.

 

[Big Reazon 10+ year member]

I want to put 2 12's in a 1985 elcamino fi q's ported is this possible I want to to extend out of the smugglers box no more than 3 inches. Or will I have to run 10s. Can someone design me one big box for the el camino or 2 small ones.