Box Design help?

[big_c_snow 10+ year member]

I have currently a bandpass box with two Lanzar VS series 10's, and I am not really sure of the specs on those, not enough to allow me to be able to design a better box for them. They are currently running about 160Wrms each, or so I am led to believe. I want to dsign a ported box, what would be a good volume and tuning for these two 10's? I listen to rap and rock mostly, if that helps anything. Thanks!

Click to read more...

 

[big_c_snow 10+ year member]

Bump.... I'm going to Lowe's tomorrow in hopes that I can get the material to build what I need, now all I need to know is what I need... Thanks!

 

[oglejust 10+ year member]

http://www.subwoofertools.com/forum/ported-box.asp?Ew=30&Eh=15&Dia=4&Xmax=15&Vd=.14&NumW=2&Vb=3&Fb=33&Qts=&Vas=&Fs=&CE=0

buy a sheet of mdf, a bottle of elmers pro-bond glue, 1.25in screws and ur set as long as u have a circular saw, jigsaw, and a drill

 

[big_c_snow 10+ year member]

See, but I don't know the Qts, Vas, or Fs, nor do I know what those even would or should be. What do those mean, and where would I be able to find those? Thanks!

 

[oglejust 10+ year member]

dont put those in i dont use that anyway.... just build what i showed u.... if u have to u can mess w/ the dimmentions but DO NOT mess w/ the other stuff

 

[big_c_snow 10+ year member]

Ha thanks, that should work and fit pretty well!