IgnoreMe
5,000+ posts
CarAudio.com VIP
actually you dont even have to make a box. just use the first one you see
http://www.reaudio.com/speaker_box/LPort_Box_Calc.html
its a little hard to see but ill write it out for a 12x12x12 box with a standard port on the front side as seen in the pic that will be 3" wide.
top and bottom pieces will be 12"w x 12"d
side pieces will be 12"d x 10.5"h
back will be 10.5"h x 10.5"w
front will be 10.5"h x 7.5"w
does that make sense about how you subtract 1.5" (assuming your using 3/4" mdf) from the sides. just like i said though you either subtract or add depending on if your using internal or external dimensions.
OH YEA I FORGOT
5) thugs dont use online forums, because they dont own computers...
http://www.reaudio.com/speaker_box/LPort_Box_Calc.html
its a little hard to see but ill write it out for a 12x12x12 box with a standard port on the front side as seen in the pic that will be 3" wide.
top and bottom pieces will be 12"w x 12"d
side pieces will be 12"d x 10.5"h
back will be 10.5"h x 10.5"w
front will be 10.5"h x 7.5"w
does that make sense about how you subtract 1.5" (assuming your using 3/4" mdf) from the sides. just like i said though you either subtract or add depending on if your using internal or external dimensions.
OH YEA I FORGOT
5) thugs dont use online forums, because they dont own computers...
