Box Build: Two 10" Type R's (3.4 cubes @ 35.4Hz)

[GAM3OVR 5,000+ posts]

Another Box I figured I'd put up.

Each sub will be individually chambered as requested by customer

I'll list specs as if they were joined:

3.528 Net volume, Roughly 3.4 after sub displacement

47.25 sq in of port area

Empty Box tuning @ 34.74 hz, w/ the displacement 35.39Hz tune

Pics uploading

Click to read more...

 

[GAM3OVR 5,000+ posts]

My cutting setup lol

I cut over a box.

The wood for the box is on the left.

More pieces adding up in the corner

 

[GAM3OVR 5,000+ posts]

All Sheets:

Drew out the ports and middle piece so they could be all mounted properly (you can see the pencil marks)

 

[GAM3OVR 5,000+ posts]

Assembly:

 

[SSS 18734 5,000+ posts]

Looks good so far, my man. Your cuts seem precise. That makes the job go by so quickly and painlessly.

 

[photocrazy8 10+ year member]

looks good, just makes me cry when people use the wrong glue...

 

[GAM3OVR 5,000+ posts]

Looks good so far, my man. Your cuts seem precise. That makes the job go by so quickly and painlessly.

Thanks, They are getting a bit better //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

looks good, just makes me cry when people use the wrong glue...

Actually, looks can be deceiving. I use this bottle becuase its easier to use, the glue inside is TITEBOND

 

[GAM3OVR 5,000+ posts]

Finishing pics uploding

 

[GAM3OVR 5,000+ posts]

 

[GAM3OVR 5,000+ posts]

 

[GAM3OVR 5,000+ posts]

BOX

 

[GAM3OVR 5,000+ posts]

A little bug came and inspected the box also. Said he approved

 

[GAM3OVR 5,000+ posts]

Carpeting

 

[GAM3OVR 5,000+ posts]

Sides:

Box chilling, waiting for customer

 

[GAM3OVR 5,000+ posts]

And finally....