Box build for Slammed

um, he didn't:confused: one of the baffles is so he can run a 12" driver if he ever needs to.....
Correct, the box was designed for a 15" sub, but he changes subs almost as often as I do so he asked for a 2nd baffle he could put on to make the box work with a 12" sub

 
um, he didn't:confused: one of the baffles is so he can run a 12" driver if he ever needs to.....
y didint you just make it to where he can insert a 15" round circle that has predrilled holes to fit the 15 and a cut out for a 12" woofer? looks better that way more proffesional I THINK

 
bb3.jpg


UPS ruined it //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Fuuuuuuuuuuuck, that blows son. Sorry to see that; SPY does good work too //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
wouldn't a 12" vs 15" sub require totally different volume and port area?
well i guess port area stays the same because is pertains to the box but still
Tuning depends on the vol of the enclosure so a different sub or different size sub would only change the vol slightly due to different driver displacement, but I think he is going to mount the sub inverted so it wouldn't change anyting in this case.

Fuuuuuuuuuuuck, that blows son. Sorry to see that; SPY does good work too //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Yes it does ****, but we will get it straightened out one way or another and thanks for the complement, I'm not a pro like some others on this forum, but for what I charge I think it's worth it.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
903
The tricky bit is that they're soft and floppy and they may be stretched a tad to go over the frames. I've used them in the past and come out...
6
2K
In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K
Thanks everyone for the feedback. I got scared of the 4th being to much for a newbie but did end up building a box to 2.1 Cubic Foot tuned to...
7
2K
Love this sub, hate AB's site, short on info for sure. American Bass XR-10D2 box recomend: If you want to tune a 2.75 Cu Ft box (for two of these...
11
3K

About this thread

SPY

5,000+ posts
CarAudio.com Veteran
Thread starter
SPY
Joined
Location
NY
Start date
Participants
Who Replied
Replies
29
Views
2,393
Last reply date
Last reply from
bigbangtheory
2B85C0D8-2A78-4A66-A9A5-F02CF89AA9E4.jpeg

SlugButter

    May 4, 2024
  • 0
  • 0
Image 5-2-24 at 8.16 PM (1).jpeg

slater

    May 2, 2024
  • 0
  • 0

Latest topics

Top