Box Build for nineballsafety8

[bjfish11 5,000+ posts]

I dont recall the specs off the top of my head. Maybe he will swing in with them. Not a regular ole' ported box. I like getting these kind of builds sometimes. Nice to change it up a little every now and again.

Click to read more...

 

[91Chevy 10+ year member]

Looks good. As usual.

 

[Rashaddd 5,000+ posts]

looks complicated //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[bjfish11 5,000+ posts]

Here is what we are aiming for:

 

[Rashaddd 5,000+ posts]

Here is what we are aiming for:

Not so complicated, gotcha //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[nineballsafety8 10+ year member]

things have been a little crazy as of late, so the actual specs are quite fresh in my mind... but they are "in general" as follows

roughly 8 cubs (i think, i should probably look that up LOL)

tuned at 30Hz

box is for 2 eD 19ov.2's

if we can get IONSQL to swing by, he did the final design on the box, and for sure can give the details on volume and tuning... I just came up with the basic idea, but my initial design was a little small on the port area and we were worried about vent velocity, so Chris, if you can through in your 2 cents... go ahead

 

[wasted ink 10+ year member]

looks good to me. im assuming this is the "fun" one you were speaking of? tuned in //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[bjfish11 5,000+ posts]

looks good to me. im assuming this is the "fun" one you were speaking of? tuned in //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

This is the one //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Here is the build completed and ready for carpet.

 

[wasted ink 10+ year member]

//content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif//content.invisioncic.com/y282845/emoticons/applause.gif.bb805d8088f72dbc2fe808c29e85fb4c.gif

 

[bjfish11 5,000+ posts]

Here is another one in the books...

 

[mrbomb 10+ year member]

amazing as always, great work

 

[Orion Man 10+ year member]

Nice work Fish! I like the style of port you did in it.

 

[duece212 5,000+ posts]

Looks great as usual, spose its a bit more of a pain with the angles when the port runs down the slanted wall of the box.

 

[bjfish11 5,000+ posts]

Thanks guys.

Yea, its a little more difficult build. The hardest thing was cutting out the port on the top panel. Since it is angled, I had to make a shim for the router to be able to run my flush bit down it. Still couldnt get it perfect with that, so had to do a little hand sanding.

 

[MmatsDude 10+ year member]

Man this is nice. You must have really nice tools.(And skillz ofcourse) Lol.

Btw, ygpm.