box broke wtf

[Slammer 10+ year member]

It is because the boards are not properly secured. Has nothing to do with the depth of the box compared to the mounting depth of the driver. You could concievably have a 1/4" of clearance between the magnet and the rear of the box if necessary. The reason it is moving in and out closer to the sub, is because of the movement of the sub itself........ your vent doesn't move.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif The board's fluctuation is because of the sub's movement, not the air pressure being generated. Pull the sub out, glue or screw the board that is moving, put the sub back and try again.........

 

[WOT]

Why are you still playing music when you know theres a problem? FIX IT!!!

Take the **** sub out you lazy sob

 

[tEh ShOcKeR]

Why are you still playing music when you know theres a problem? FIX IT!!!
Take the **** sub out you lazy sob

If he did that then how in the hell is he supposed to keep his post count up?

 

[Mike465 10+ year member]

the screws just hold the box in place while the glue drys.
u dont need screws at all if u properly glue the box and use the appropriate glue.

Not true, wood glue only bonds down about a 1/16" or less into the wood. By using screws, yes it helps hold the box together while the wood glue is seting but it helps anchor your panels together.

 

[Bobby322 10+ year member]

yeah Im going to run screws in it. Should I get a threaded bolt or 2 and put them in? Im way too busy this weekend to even **** with it.

 

[Bobby322 10+ year member]

I hate to tear the carpet up too