Bolt size Kinetik HC600

[HighTQCummins 10+ year member]

I need longer bolts for my KHC600, 3 ring terminals do not allow enough thread on the end of the bolt to grab the studs on the batt.

Does any one what size they are?

Click to read more...

 

[DBBOOM 10+ year member]

Carry one of the bolts to any hardware or autoparts store. They have bolt/thread size gages. While you're there, buy a longer bolt.

 

[duro78 10+ year member]

That will be your cheapest and easiest solution

 

[Sarthos 10+ year member]

3/8" thread. Can't remember the pitch.

 

[AlterEgo99 5,000+ posts]

Carry one of the bolts to any hardware or autoparts store. They have bolt/thread size gages. While you're there, buy a longer bolt.

^This

 

[nateberrier 10+ year member]

3/8s bolt brah, course thread, pretty dang common. I usually get long bolts and use washers cause i know ill put more terminals on later. I have 5 ring terminals on my positive cable now lulz.

 

[audiolife 5,000+ posts]

All Kinetiks BUT the hc 600 is 3/8" SAE the 600 I believe is 6 mm

 

[Sarthos 10+ year member]

Why must you get the ONE oddball model?

Just use a really long bolt and a nut. That's what I do, tighten the nut against the ring terminals so the bolt will work no matter how long it is.

 

[DBBOOM 10+ year member]

My suggestion will work.....................................but i know it is REALLLLLLY complicated.