Are my #'s right for this ED10k x 2 box?

[Bobyota 10+ year member]

TD = 5"

BD = 7"

Height = 11.5"

Length = 46.5"

If my #'s are right, I get 1.17 ft^3 with 3/4" wood. I don't know what room the subs take up though //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

If they took up .17, then I'd be right at 1 ft^3 and ED recomends .5 ft^3 for each 10".

But, would each sub need it's own chamber (I mean seperate the box into 2 equal half's, one for each sub)?

Click to read more...

 

[mgaidica 10+ year member]

yeh, ur nubmers are right.. with a sealed box .1 cu ft should matter all that much.. You CAN make seperate chambers.. although u dont have to.. it only prvents both from possibly blowing (one goes out, the other most likely wont).. personal preference..

 

[Bobyota 10+ year member]

Thanks man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Will it make any sound diference with 2 seperate chambers? I basically want good sound from this system, and a lil spl too.

 

[mgaidica 10+ year member]

not really any sound difference if the seperator is put in the right place.. if its in the wrong place u might have problems..