Another Box Build for IonSQL

[Blove1991 10+ year member]

nice, i've seen some box's done that way, always cool to see it.

Im pretty sure he's just not kerfing that peice:fro:

 

[bjfish11 5,000+ posts]

Actually its Trupan Light, you should know I dont use MDF. I use the expensive, high quality stuff //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I dont know if there is a name for this specific design, I have never seen it before. Chris just came to me with this design and Im giving it a try. All credit goes to him for the design. Some of the stuff he comes up with.... is just flat out amazing.

 

[bjfish11 5,000+ posts]

Im pretty sure he's just not kerfing that peice:fro:

//content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

 

[mendon99 10+ year member]

in for more.

 

[xplicitACTS 10+ year member]

can trupan be picked up at HD or lowes?....if so how much per sheet?

 

[bjfish11 5,000+ posts]

I doubt you can get it at Lowes or HD. You will have to try your local lumberyard. Expect to pay around $35-40 per sheet.

 

[Immacomputer 10+ year member]

Looks good so far. I've thought about rounding off all the corners before but not having a flush bit for my broken router kept me from trying. Well, that and the fact that kerfing is a ***** and takes a while without a movable saw.

How did you handle kerfing that long piece? I know you have a badass shop but I would like to see where you did that and how difficult it was.

 

[bjfish11 5,000+ posts]

Looks good so far. I've thought about rounding off all the corners before but not having a flush bit for my broken router kept me from trying. Well, that and the fact that kerfing is a ***** and takes a while without a movable saw.
How did you handle kerfing that long piece? I know you have a badass shop but I would like to see where you did that and how difficult it was.

Use a table saw. It wasnt really all that difficult, I did have to have someone hold the far end after it had been kerfed because it wanted to droop over the edge. It really wasnt too bad though, just took some time.

 

[AudioXtremes 10+ year member]

I really need to try some kerfing!

 

[DaBeholder 10+ year member]

that's hawt!!!

 

[snb778 5,000+ posts]

I love that style...reminds me of......well you guys know who

 

[IonSQL 10+ year member]

I love that style...reminds me of......well you guys know who

ooh, didn't have to go there //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[BadAndy44 10+ year member]

WOW amazing!!!

 

[Immacomputer 10+ year member]

Use a table saw. It wasnt really all that difficult, I did have to have someone hold the far end after it had been kerfed because it wanted to droop over the edge. It really wasnt too bad though, just took some time.

I used a table saw with a 30" arm and kerfing a 60" piece was annoying as hell. I was by myself and I had issues with the center bowing up where I was making the cuts. It would have helped to have a friend or table extension.

 

[stishdr 10+ year member]

very nice...i'm exited //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif