cotjones 10+ year member
CarAudio.com Veteran
Looking to buy an amp to power (4) JL 10w6v2's in a sealed box
According to specs they can take a max. RMS of 600
Dual 4 ohm coils, So I can either configure the 4 of them at 2 ohms or .5 ohms
So I figure I can go up to a 2400 watts at 2 Ohm, without headroom in the subs,
however, I don't have a good inexpensive solution for inputs beyond line output converters, so I really don't want to drive them at 100%. Particularly because I can most likely get by on stock electrical with a 1600 watt amp, but probs not with a 2400.
So the one I had my eye on is the Hifonics Brutus BRX2400.1D which is available for a ridiculously cheap $220 on sonic electronics. This would drive them at 1600 RMS @ 2 ohms.
Anyone have experience with this amp, or have a better recommendation?
According to specs they can take a max. RMS of 600
Dual 4 ohm coils, So I can either configure the 4 of them at 2 ohms or .5 ohms
So I figure I can go up to a 2400 watts at 2 Ohm, without headroom in the subs,
however, I don't have a good inexpensive solution for inputs beyond line output converters, so I really don't want to drive them at 100%. Particularly because I can most likely get by on stock electrical with a 1600 watt amp, but probs not with a 2400.
So the one I had my eye on is the Hifonics Brutus BRX2400.1D which is available for a ridiculously cheap $220 on sonic electronics. This would drive them at 1600 RMS @ 2 ohms.
Anyone have experience with this amp, or have a better recommendation?