I'm considering an amp to run one S10L7 dual voice coil 4ohm or 8ohm solobric sub. I don't want to pay more than $200. I like fosgate. Should I go with a one channel amp or a two channel amp? whats the best way to wire to get the most out of my amp and sub? also, installation into a convertible mustang. any recommendations for positioning?
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
- Started by RyanJ0022
- General Car Audio
- Locked
COMPLETED
WTB - Small Mono Amp WxDxH
NVX MVPA1
Best tiny amp
Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater
Can bump it all day long and barely gets...
- Started by AnthonyO
- Car Audio Wanted
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
- Started by saints747
- General Car Audio
Mine were as short as possible and still I had issues routing them cleanly
- Started by kanihoncho
- Wiring, Electrical & Installation
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
- Started by kanihoncho
- Wiring, Electrical & Installation
About this thread
New threads
-
-
What type and placement of box for dual 8 or 10" shallow depth subs for 2011 Hyundai Veracruz?
- Started by kanihoncho
- Replies: 4
-
-
-