Amp for dc 12" lvl. 3

  • 1
    Participant count
  • Participant list

steele6794
10+ year member

Member
66
0
Boston
Running the lvl. 3 at 2 ohms in a 1.25 cu.ft sealed box, and the sub is rated at 900rms.

Looking for some headroom in case I go with a more powerful sub in the future. Budget is $400. I was looking at:

Synergy WFO 1.5

Twisted sounds 1.8

And cheaper options:

Cab 1600.1

Skar rp2000

What would the advantages be with the synergy and twisted over the cab. and skar? Any other good options I'm missing?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
179
No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
383
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
480
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
769
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
559

About this thread

steele6794

10+ year member
Member
Thread starter
steele6794
Joined
Location
Boston
Start date
Participants
Who Replied
Replies
0
Views
407
Last reply date
Last reply from
steele6794
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top