amp doesnt turn on

ok thanks it worked. i tied the amps remote turn on lead to the blue/white wire instead of the solid blue wire and now works no matter what source the hu is on. thanks

 
yes it turns off when i turn the hu off. it turns on when the hu is on, no matter the source and then shuts off when the hu gets turned off.

 
thing about test lights is they have a tendacy to set of airbags if not careful so if you get one make sure you get the computer safe type and also a dmm is way better
Power probes are computer safe, and work much better than a test light. They give you the ability to power and ground any wire you want to.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Subs play to the beat with gain low but if I turn it up my subs play loud unwanted never ending bass that is constant and wont stop until I turn...
0
39
You have a blown cap in the amp more than likely. Had the same thing happen to a soundstream amp.
1
61
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
242
No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
448

About this thread

google123

10+ year member
Senior VIP Member
Thread starter
google123
Joined
Location
texas
Start date
Participants
Who Replied
Replies
19
Views
942
Last reply date
Last reply from
avs20
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top