American bass vfl comp1k smoking

70698687262__898F00E0-A0C8-47F6-A8C0-B4C61842549F.jpeg
 
Without better photos it's hard to really see anything. Based off of those it looks just fine.

Grab a digital multimeter, set it to continuity check (audible beep) and check for continuity between gate, drain, and source legs of all mosfets. Keep in mind that occasionally there will be a beep that will go away after a few seconds. That's normal as you're charging a cap somewhere in the circuit.

Smoking usually indicates a power supply fault so it's best to check there.

Also don't freak out when the rectifier diodes show continuity, that's normal.
 
Activity
No one is currently typing a reply...

Similar threads

  • Locked
Great amp. Ran on nothing lower than 13.9 volts ever. Adult owned and never abused. Looks: 8 of 10. A few scratches due to being used...
0
1K
So it looks like you have up to 2.75" openings in the dash, 6"x9" openings in the front doors and up to 6.75" in the rear doors. Since you're...
10
127
Yes, they are definitely beefy. I beat the snot out of this one to find it's limits and it took it rather well. For the abuse I put it through and...
2
703
Placed a pair in a an enclosure according to enclosure specs below on a Crescendo Skyway 3k and they seem to be doing very nice and really...
0
677
Yeah I had torn one down and used my digital calipers to measure coil size ID & OD and winding height and spiders all had it written down and had...
4
1K

About this thread

Thomas@scottsmobile

CarAudio.com Newbie
Thread starter
Thomas@scottsmobile
Joined
Location
Jeffersonville Indiana
Start date
Participants
Who Replied
Replies
9
Views
1,202
Last reply date
Last reply from
Bumpin' Yota
1710798774277.png

Doxquzme

    Mar 18, 2024
  • 0
  • 0
1710782370180.png

Doxquzme

    Mar 18, 2024
  • 0
  • 0

Latest topics

Top