I AM SELLING THE 10IN. ALPINE TYPE R WITH AMPLIFIER TO POWER UP YOUR SYSTEM. THE AMPS is THE AUDIOBAHN A12005DN MONO AMP- 600 RMS X 1
I am willing to work out a price,i wanted to get $300.00.
If you'd like you can also have my Q logic box that goes perfect for the sub with my 3 farad capacitor, all for $450.
just contact me if you are interested. email me at diabolicskull@hotmail.com. I am constantly around the computer to repond to any email. Thank you.
HERE ARE THE STATS:
ALPINE SWR-1042D TYPE R :
10" subwoofer with dual 4-ohm voice coils
Kevlar reinforced pulp cone with Santoprene™ rubber surround
cast aluminum frame with perimeter venting
frequency response: 26-600 Hz
power handling: 200-500 watts RMS (250 watts per coil)
peak power: 1,500 watts
sensitivity: 83 dB
top-mount depth: 6-7/8"
sealed box volume: 0.5-0.8
ported box volume: 0.6-1.3
Audiobahn A12005DN:
Class D mono subwoofer amplifier
375 watts RMS x 1 at 4 ohms
600 watts RMS x 1 at 2 ohms
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
2 x 30-amp fuses
40-120 Hz low-pass crossover, 18 dB/octave
0-18 dB bass boost at 45 Hz
preamp outputs
speaker- and preamp-level inputs
cooling fan
cobalt blue illumination
I am willing to work out a price,i wanted to get $300.00.
If you'd like you can also have my Q logic box that goes perfect for the sub with my 3 farad capacitor, all for $450.
just contact me if you are interested. email me at diabolicskull@hotmail.com. I am constantly around the computer to repond to any email. Thank you.
HERE ARE THE STATS:
ALPINE SWR-1042D TYPE R :
10" subwoofer with dual 4-ohm voice coils
Kevlar reinforced pulp cone with Santoprene™ rubber surround
cast aluminum frame with perimeter venting
frequency response: 26-600 Hz
power handling: 200-500 watts RMS (250 watts per coil)
peak power: 1,500 watts
sensitivity: 83 dB
top-mount depth: 6-7/8"
sealed box volume: 0.5-0.8
ported box volume: 0.6-1.3
Audiobahn A12005DN:
Class D mono subwoofer amplifier
375 watts RMS x 1 at 4 ohms
600 watts RMS x 1 at 2 ohms
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
2 x 30-amp fuses
40-120 Hz low-pass crossover, 18 dB/octave
0-18 dB bass boost at 45 Hz
preamp outputs
speaker- and preamp-level inputs
cooling fan
cobalt blue illumination