Alpine Type R 10s/new version

looks like I have gotten some excellent information from people on here,and i do appreciate your time.I will consider a pair of these subs for sure,.Thanks guys for all the input, and information.Any other Input is welcomed,I thank you:santa:

 
As far as his review of the Type R "problem," I feel like it isn't exactly that devastating. The leads follow the curve of the spider, meaning they can travel just as far as the spider itself. Under no amount of excursion will the leads be "shorter" than the spider. The surround also keeps the cone/coil from "rocking" much at all. Possibly under the condition that he is reaching excursion levels further than the subs were built for, it could eventually cause failure, but I'm sure Alpine would replace them if that was the case.. the pair of 12's on 1700w have been abused for over 2 years without failure so I wouldn't hesitate at all to pick up another pair.

 
As far as his review of the Type R "problem," I feel like it isn't exactly that devastating. The leads follow the curve of the spider, meaning they can travel just as far as the spider itself. Under no amount of excursion will the leads be "shorter" than the spider. The surround also keeps the cone/coil from "rocking" much at all. Possibly under the condition that he is reaching excursion levels further than the subs were built for, it could eventually cause failure, but I'm sure Alpine would replace them if that was the case.. the pair of 12's on 1700w have been abused for over 2 years without failure so I wouldn't hesitate at all to pick up another pair.
I think you are 100% correct on that one as well..I did notice in the Video that there seemed to be quit a few BLOWN Subs lying around ..LOL...Some folks love clipping,and have deep pockets and that video has answered alot of my questioning.LOL..Thanks SkyLine appreciate it

 
For what its worth my buddy ran a pair of the new 12s. 1500 rms to the pair. Prefab ported box. In the trunk of a dodge avenger and it was surprisingly pretty loud. Much much louder than the older models, SQ and low end lacked but that could most likely be had with a better box. But all in all I doubt you'll find a better $150 woofer.
in that price range, AQ has their sdc2.5 models as well, I would simply rather deal with AQ than alpine. But also, I havent dealt with these specific subs

 
Well,guys,I decided to go with a pair of these here,after getting some info on a thread..i had no Idea they made DVC10s,and carry a 5yr warranty.these should do just fine on these amps, and hopefully I will not have to make another sub box..That will be determined at a later time once received and played.I thank you all for the info, and Input.

Dayton Audio RSS265HO-4 10" Reference HO Subwoofer 4 Ohm 295-462

 
Im running a Pair of CVR in my Honda CRV,in approx 1.6 cu ft per chamber ported @around 34 htz, @2ohms per sub on 1-Autotek Mean Machine 66 per sub,and they are getting down fine.
I can attest to this, blew me away when I heard it! Sure as hell didn't expect them to get down like they did, and on such little power.

Can't wait to hear your new set up, when I get back ill be finishing up my box along with the big 3, etc, etc.. Ill call ya when it's done so we can meet up and you can hear it:)

 
Well,guys,I decided to go with a pair of these here,after getting some info on a thread..i had no Idea they made DVC10s,and carry a 5yr warranty.these should do just fine on these amps, and hopefully I will not have to make another sub box..That will be determined at a later time once received and played.I thank you all for the info, and Input.Dayton Audio RSS265HO-4 10" Reference HO Subwoofer 4 Ohm 295-462
The other day I threw put together ported box model for two HO10s (SVC) in a ported box. It looked good in a 1.2cu ft box tuned in low 30s, which is surprisingly compact ported box for a dual subwoofer setup. I can't comment on the DVC version, as the T/S parameters may be considerably different between the SVC and DVC versions. In case of the 12 inch version of HO sub, the SVC and DVC models were around for a while, and I noticed that the HO12 version as a bit more of xmax, lower resonance frequency, but also much lower sensitivity than the SVC version. The same may be true to the 10 inch subs.

 
My brother is running one 12 on a sh*tty Crunch amp in a prefab..yeah, his setup is f*cked up, but it didn't sound horrible for the abuse he's putting it through.

 
I can attest to this, blew me away when I heard it! Sure as hell didn't expect them to get down like they did, and on such little power.
Can't wait to hear your new set up, when I get back ill be finishing up my box along with the big 3, etc, etc.. Ill call ya when it's done so we can meet up and you can hear it:)[/QUOT

Im hoping to get the front stage in tact soon to keep up with the bass a bit more,so I can crank it up..LOL..Got to love old school Zed Cheaters my man,alot of people think they need 1k watts,not knowing what little 60 watt cheaters can produce,and folks pass them up.I am very interested in getting to hear your truck man,,Ill bet those mids are getting down in those pods too.I thank you sir:D..I have plenty of amps that get down and are clean for front staging for your ladys ride..just let me know..Ill swing you a sweet deal on a sweat/clean amp
 
..hopefully I will not have to make another sub box..That will be determined at a later time once received and played.I thank you all for the info, and Input.Dayton Audio RSS265HO-4 10" Reference HO Subwoofer 4 Ohm 295-462
if you do end up needing a box let me know my man i can build ya one, do some nice round overs, etc, etc..//content.invisioncic.com/y282845/emoticons/nerd.gif.c6fa51ddf7ff75f1c0371fbc648f70ae.gif

Im hoping to get the front stage in tact soon to keep up with the bass a bit more,so I can crank it up..LOL..Got to love old school Zed Cheaters my man,alot of people think they need 1k watts,not knowing what little 60 watt cheaters can produce,and folks pass them up.I am very interested in getting to hear your truck man,,Ill bet those mids are getting down in those pods too.I thank you sir:D..I have plenty of amps that get down and are clean for front staging for your ladys ride..just let me know..Ill swing you a sweet deal on a sweat/clean amp
there sick amps for sure! you made me a believer..

and yeah they are! i cant wait to get the second set in.. I bought that set of MQ Quartz comp set on here for my girls ride so i can pull my crescendos out and put them in my truck! lol

their rated at 60 rms but im thinking they can handle a little more than that. and the tweet also, here the link to them

MB Quart PCE164 (pce164) 6-1/2" (fits in 6-3/4" Location)

you got anything that could power them well?:)

 
if you do end up needing a box let me know my man i can build ya one, do some nice round overs, etc, etc..//content.invisioncic.com/y282845/emoticons/nerd.gif.c6fa51ddf7ff75f1c0371fbc648f70ae.gif


there sick amps for sure! you made me a believer..

and yeah they are! i cant wait to get the second set in.. I bought that set of MQ Quartz comp set on here for my girls ride so i can pull my crescendos out and put them in my truck! lol

their rated at 60 rms but im thinking they can handle a little more than that. and the tweet also, here the link to them

MB Quart PCE164 (pce164) 6-1/2" (fits in 6-3/4" Location)

you got anything that could power them well?:)
I sure do..lol,approx 20 of them,let me know your maxed budget, and ill give you the best I have/fair deal!Real power

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

audiobaun

5,000+ posts
CarAudio.com Veteran
Thread starter
audiobaun
Joined
Location
USA
Start date
Participants
Who Replied
Replies
33
Views
2,688
Last reply date
Last reply from
audiobaun
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top