Aftermarket Double Din for 2005 Acua MDX

  • 1
    Participant count
  • Participant list
Ok so on all the cars I've worked on they have been pretty simple to change the head unit. With this vehicle it has two factory amps and Navigation. One amp is apparently for the Sub and the other is for the 6 speakers.

So what I'm looking for is some help on figuring out how to bypass the factory amp for the 6 speakers and hook up the factory sub and amp to the head unit.

Any help would be appreciated

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

No way to tell if the wiring is bastardized without looking for yourself. Wiring adapters are cheap enough at installer.com. That said there is...
4
687
High pitch whine is usually a grounding or interference issue or from using inexpensive signals cables run parallel to power/ground lines. Or, as...
6
1K
So you have your main power wire which feed the current it needs. Your original HU would have had it, and you probably connected your new HU to...
2
842
Nice, well I think they will blow away anything you have running on your puter for sure. I've had good luck with the NVX components, hard to beat...
16
2K

About this thread

BORIStheBLADE1

Junior Member
Thread starter
BORIStheBLADE1
Joined
Location
San Francisco
Start date
Participants
Who Replied
Replies
0
Views
478
Last reply date
Last reply from
BORIStheBLADE1
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top