After Market speakers (triton) sound way too harsh

[COSMICBEATS]

Hey, so i recently decided i wanted to upgrade my honda stock speakers to an aftermarket brand. I have a 12 inch pioneer with a built-in amp which sounds amazing. My honda stock speakers sounded fine the only issue was i wanted to be able to play it a bit louder than what it was at before without it becoming distorting. After going to an audio shop the guy recommended me the Triton SQ 522 series. Right off the bat after installation i noticed how harsh these speakers were. Any song would have my ears ringing. After touching the settings i was able to turn the gain down but they still have that harshness to them. What should i do, i spent a lot of money on this just to not be satisfied

Below are my amp settings for the sub and the speakers

 

[COSMICBEATS]

Hey, so i recently decided i wanted to upgrade my honda stock speakers to an aftermarket brand. I have a 12 inch pioneer with a built-in amp which sounds amazing. My honda stock speakers sounded fine the only issue was i wanted to be able to play it a bit louder than what it was at before without it becoming distorting. After going to an audio shop the guy recommended me the Triton SQ 522 series. Right off the bat after installation i noticed how harsh these speakers were. Any song would have my ears ringing. After touching the settings i was able to turn the gain down but they still have that harshness to them. What should i do, i spent a lot of money on this just to not be satisfied ☹

Below are my amp settings for the sub and the speakers

i’m also in a 2018 Honda civic si coupe

 

[1aespinoza]

What should i do, i spent a lot of money on this just to not be satisfied ☹

Did you readjust the eq settings on the radio?

 

[Bobbytwonames]

I'm assuming these are turned all the way up. Turn them down a little bit (⅛ - ¼") and then give it a listen. The gain looks a little high also.

 

[Bobbytwonames]

You need to turn your 12Khz. to 20Khz. tones down some how.

 

[COSMICBEATS]

Did you readjust the eq settings on the radio?

yes already did this

 

[Bobbytwonames]

yes already did this

How many band is your EQ? Pics?

 

[COSMICBEATS]

How many band is your EQ? Pics?

just a normal honda civic radio so it’s only 3 bands (bass, mid, treble) Do you know of any car speakers that are not that harsh but sound good

 

[hispls]

Pop open the crossover module and try the -3 and -6db switches and see if that doesn't tame things a little. I'd also think you can turn down the crossovers on your amp some. 120hz is too high. Play some bass heavy music and turn those down slowly and either watch the cones or listen for signs of mechanical stress on the low notes then turn it back up a touch after you've reached that point.

 

[COSMICBEATS]

Pop open the crossover module and try the -3 and -6db switches and see if that doesn't tame things a little. I'd also think you can turn down the crossovers on your amp some. 120hz is too high. Play some bass heavy music and turn those down slowly and either watch the cones or listen for signs of mechanical stress on the low notes then turn it back up a touch after you've reached that point.

where are the cross over modules located ??

 

[1aespinoza]

where are the cross over modules located ??

 

[COSMICBEATS]

View attachment 38545

i don’t think my amp has that or does every amp have that setting

 

[1aespinoza]

i don’t think my amp has that or does every amp have that setting

The speakers you posted have those. Installer probably put them in the door where each speaker is located.

 

[COSMICBEATS]

The speakers you posted have those. Installer probably put them in the door where each speaker is located.

so is it located on the amp or

 

[Coolhand20th]

IN the Door is where most installers put those as he said. Pull the door panel and look for the crossover he posted.