Advice from the sub guru's

[Fast1one 10+ year member]

^^^Lol.....was it an option? Maybe you can find seats that fit and have the skihole option...i wouldnt be so quick to tear up your car. If you would ever sell it, be kinda tuff if your rear seat has holes //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Myster 10+ year member]

^^^Lol.....was it an option? Maybe you can find seats that fit and have the skihole option...i wouldnt be so quick to tear up your car. If you would ever sell it, be kinda tuff if your rear seat has holes //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Yea, I know every car I've had becomes a project/company car. My old VW only had the front interior and the rest was fiberglass! Not worried about the hole, that why I have an armrest!

The old system....

 

[Myster 10+ year member]

I was thinking of making a ported enclosure, which would port through the same area I would cut for the IB setup.

Here is a pic of the setup I am thinking about modeling it after..

 

[VereChronicus 10+ year member]

Pair of 8's. My recommendation is the AudioQue SD2-8 or the Digital Designs 1008a. Both work ridiculously well in .75-1.0 net cube box each.....so a dual chamber 2 cubic feet enclosure with 2 vents of 16 square inches x 20" long each. It'll get absolutely stupid if you built the box as two separate chambers firing toward each other with a 10" wide chamber in the middle that mates up to the seat opening in the picture above. The ports would be along the trunk side wall of the enclosure firing toward the middle, just like the subs. From rock solid kick drum reinforcement to retarded output when you want it.

 

[VereChronicus 10+ year member]

The two websites are:

http://www.audioque.com

http://www.ddaudio.com