9510G Box Design - Help Needed

[SeanDub 10+ year member]

So I just bought a DD 9510G and I now I need a box for it. I want it to hit the lows and be loud, like just about everyone. I was thinking 1.75 cubes net tuned to 35 hertz. But have no idea how much port area to use with a ten. The only other box I have designed was for my 9917 and it has over 100 square inches of port. So I was thinking around 50 square inches of port - what do you think?

Also, if you want to throw me out a design or some other options as far as size, tuning, and port area, go ahead

Also, if you've ever worked with a 9510, help me out man.

Thanks.

Click to read more...

 

[Qbenjamin 10+ year member]

PM IonSQL.

 

[J31Rob 5,000+ posts]

I've got GREAT design for these subs.. hit me up.. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Louisiana_CRX 5,000+ posts]

Is this for daily...competition or what?

 

[fwb_1234 10+ year member]

daily. i'll answer for him. I'm sure that he'll want an spl version too though.

 

[J31Rob 5,000+ posts]

Is this for daily...competition or what?

35 hz.. sounds daily.

 

[Louisiana_CRX 5,000+ posts]

With my 9510 in My Saleen tuned low for daily...and it sounds awesome I did a 143.1 SB1 average...on 2 DD M1's strapped at 2 ohm mono

 

[SeanDub 10+ year member]

Well I designed 2 boxes:

A) 1.95 net, 52.5 square inches of port, and tuned to 38hz

B) 1.97 net, 47.25 square inches of port, and tuned to 36hz

I'm thinking B, but I was thinking about going with A to try out the slightly higher tuning and more port area.

Opinions/advice/questions?

 

[massiveaudiocw 10+ year member]

i would do like 1.5 cubes @ 40hz w/ 24" of port

 

[SeanDub 10+ year member]

alright, I'll try and create a design that'll do that. There are some problems trying to get it that small because of how I want it to fit in my car, but I'll sacrifice for the good of the box i guess. haha

 

[SeanDub 10+ year member]

Okay, I designed a 1.53 net cube box tuned to 39.61 hz with 30 square inches of port.

Sound right to everyone?

 

[SeanDub 10+ year member]

Okay, new idea - 1.53 cubes, 39.62 hz, 30 square inches of port.

Designed in SketchUp; what do you think? Any problems?

 

[hemiscott 10+ year member]

How did this work out for you ? I am thinking of going this route.. What vehicle ? Thx

 

[djman37 5,000+ posts]

DD's specs for 10's

1.25^ft (1) 8" or (1) 10" 20.0 sq" vent x 17" long tunes to 40Hz

1.50^ft (2) 8" or (1) 10" 24.0 sq" vent x 16" long tunes to 40Hz

jani's calc(i think)

http://www.soundpressure.com sample box calc in the middle right at the top.

I'd rather use bracing than triple baffle for support....that's got to be HEAVY.

 

[hemiscott 10+ year member]

Ya, i just want to see how happy he is with it.. If i do go this route (as in getting a 9510g) I will use a double baffle... I'm just trying to find something smaller than a 15" that will bump loud, daily. Thx