you may have to cut a wooden enclosure for ur new speakers as the stock speakers are very shallow. if you switch to aftermarket speakers, the deeper voicecoil will not fit into the same hole. Get a 1/2'' - 1'' thick piece of MDF and cut a doughnut shaped ring. mount the ring to the door and mount the speaker to the ring. I know this b/c I have a 93' accord and watched my local installer do it for my speakers. As for dissassembling the door panel, referring to when your looking directly at the driver side door, there's a round cover with a screw behind it at the left bottom of the door, another screw inside the little tray thingy/hand grip below the power windows, another screw behind the hand lever where u go to open the door. make sure u don't bust this last door handle piece like i did. once u unscrew it, you have to forcibly but carefully shift the handle to the RIGHT to unlock it as it is mounted to the door. then pull out and detach the bar and wires connected to it. then pull on the sides of the door panel, the clips will come out....hope it helps, if u haven't done it already....