600 rms needed

[BrownVanMan 10+ year member]

need 600x1 at either 1 or 4 ohm or 300x2 at 2 ohm. lmk what ya got. cheaper the better but will concider anything!!!! prefer class D and have a sub sonic filter too but not a deal breaker

Click to read more...

 

[OmegaBunny 10+ year member]

AP15001D does 600 x 1 @ 4ohm.

2011 Audiopipe AP15001D 1500 Watt Mono D Class Amp 16V - eBay (item 260692500777 end time Mar-13-11 17:30:05 PDT)

 

[BrownVanMan 10+ year member]

will it actually do that? or are the ratings at 14.4 or even 16v?

 

[xxxbasshead 10+ year member]

Orion 2150sx 300*2@4 ohms rated at 12.8 iirc. but you will need an external crossover. 150+ship

 

[Darkness DT1 10+ year member]

I've got a new alpine pdx-m6

 

[Oh6AcCoRd 10+ year member]

i have an audiopipe 15001d i just got last week. PM me. i might sell it for the right deal.

 

[OmegaBunny 10+ year member]

Looking for some test results now.

 

[Imtjnotu 5,000+ posts]

Hey mn just sent u a pm

 

[Imtjnotu 5,000+ posts]

I'm seling my phoenix gld xenon 600.1

 

[Shinju 10+ year member]

MB Quart DSC-2150 Mint in box 600x1 at 4ohm with everything you asked for minus being a class D even has a SS filter too.

http://www.caraudio.com/forums/amplifier-classifieds/506417-like-nib-mb-quart-dsc-2150-a.html

 

[snoop562 10+ year member]

pm sent

 

[speedair2 10+ year member]

i have a kicker zx 750

 

[stereo_luver 10+ year member]

I have a Soundstream VGA 800.2 Van Gogh that is Class AB but runs cool. Besides, Class D amps aren't as efficient in the upper volume levels as most people think. Ask most any tech. They drink as much power as Class AB amps when you turn up the volume.

2 X 200 RMS 4 Ohm

2 X 400 RMS 2 Ohm

1 X 800 RMS 4 Ohm Mono

RUBI™ (Rapid-Use Branched Impulse) Proprietary power supply topology

STACT™ (STabilized Apex Current Topology) Reduces power supply stress by 50%

Trident™ Amplifier protection topology

Ultra Low ESR Capacitance bank ensures rapid power delivery for dynamic peaks

Continuously variable 12dB low-pass crossover (30Hz to 4kHz)

IDI™ (Intelligent Distress Indicator) gives visual amplifier protection status

Triple Darlington OUtput Circuitry

Continuously variable high and low pass crossovers with 12 dB / Octave slope (30-4KHz)

Vortex induction fan for thermal management

Platinum RCA Line inputs and outputs

Platinum 4 gauge power inputs

Rail stabilization protection circuitry

Tri-mode operation

BIP™ Bias Input Protection

Harmonic Bass Alignment™ Produces tighter, more accurate bass reproduction

Bi-Linear selectable 2 way crossovers for amplifiers and line outs

10Hz - 50 KHz Frequency response

>115dB S/N ratio

>500 Damping

.15V - 12.0V Input sensitivity

0.02% THD

Dimensions Dimensions 15.8" L X 2.6" H X 11.2"W

 

[BrownVanMan 10+ year member]

How much to 55406?

I have a Soundstream VGA 800.2 Van Gogh that is Class AB but runs cool. Besides, Class D amps aren't as efficient in the upper volume levels as most people think. Ask most any tech. They drink as much power as Class AB amps when you turn up the volume.
2 X 200 RMS 4 Ohm

2 X 400 RMS 2 Ohm

1 X 800 RMS 4 Ohm Mono

RUBI™ (Rapid-Use Branched Impulse) Proprietary power supply topology

STACT™ (STabilized Apex Current Topology) Reduces power supply stress by 50%

Trident™ Amplifier protection topology

Ultra Low ESR Capacitance bank ensures rapid power delivery for dynamic peaks

Continuously variable 12dB low-pass crossover (30Hz to 4kHz)

IDI™ (Intelligent Distress Indicator) gives visual amplifier protection status

Triple Darlington OUtput Circuitry

Continuously variable high and low pass crossovers with 12 dB / Octave slope (30-4KHz)

Vortex induction fan for thermal management

Platinum RCA Line inputs and outputs

Platinum 4 gauge power inputs

Rail stabilization protection circuitry

Tri-mode operation

BIP™ Bias Input Protection

Harmonic Bass Alignment™ Produces tighter, more accurate bass reproduction

Bi-Linear selectable 2 way crossovers for amplifiers and line outs

10Hz - 50 KHz Frequency response

>115dB S/N ratio

>500 Damping

.15V - 12.0V Input sensitivity

0.02% THD

Dimensions Dimensions 15.8" L X 2.6" H X 11.2"W

 

[treylittlefield 10+ year member]

i have a bazooka P5000 (1100@1) does rated power and a beast of an amp. 125 shipped OBO.