4 12 inch sub box ???

ok i have a small car which means i have a small trunk. i want to be able to get 4 12's in there would this box work here is its size.

LENGHT 30 INCHES

BOTTOM WIDTH 25 1/2 INCHES

TOP WIDTH 22 3/4 INCHES

HEIGHT 13 INCHES

ENCLOSURE HAS 1.13 CUBIC FEET

my dual 12 ported box is biger its just the 4 12 box is like 8 inchs deeper . And allso would the cubic feet work the box is not ported?

 
technically yes you could fit 4 of those sealed in there (airspace wise), you just gotta figure out how you want them mounted. maybe 2 on top 2 facing back? or figure out how to put them all facing up?

btw i put it in the calculator here http://www.bcae1.com/spboxnew2.htm and if i did everything right i got 4.291 feet^3... thats with 3/4" wood as well. sub displacement would mean you'd get a little under 4 cubes depending on what subs (different displacements). so some poly-fil and you should be alright.

 
nice now i gota upgrade my stock wires i hope i dont need to get a ho alt man i hope not that would **** i dont mind a better battary. ill keep every one up today ones i get my wires right it rained today and i was at work .

 
well i was thinking abou this amp BXI1606D BRUTUS 1600-Watt x 1 RMS @ 1-Ohm but some guys are sayin the 1800. And i want kicker comps but i cant find dual 2 ohm 400 rms subs that are not to much. so im looking for the subs. im not gona get to ahead of my self i gota see what my volt is and all that good stuff so i got the box and i got the amp well at least the company i just gota find that model the 1800

 
its is a 1999 for escort se i got it not to long ago i gota do a wire up grade and take it from there. i wanted to use my subs just get to more . there 250 rms mtx jackhammers. i have my amp sending 300 rms to each i dont have my amp bridged . it gets to hot and my volt drop is bad right now i dont wana kill my battery.

 
well i was thinking abou this amp BXI1606D BRUTUS 1600-Watt x 1 RMS @ 1-Ohm but some guys are sayin the 1800. And i want kicker comps but i cant find dual 2 ohm 400 rms subs that are not to much. so im looking for the subs. im not gona get to ahead of my self i gota see what my volt is and all that good stuff so i got the box and i got the amp well at least the company i just gota find that model the 1800

bxi1606D put out 1100 wrms on GOOD electrical.

 
oh so there amps are over rated by alot then . well i gota see if i might as well do a ho alt at least 150 amps i got 400 lets see how that goes i been thinking about it all day its just im trying to do it with out the ho alt at this time cuz if i get the alt then i gota get the battery and that would leave me with no money for a box or subs or even a amp. its a hard call for me.

 
If I were you I would either get a good 1000 wrms amp and run 2 good 10's or 12's in a specified ported box. If you are going to get a HO alt and another batt I wouldnt waste my time with a bxi amp. just an opinion.

 
i more or less have to see what i can run with my big 3 upgrade its just i dont wana do the big 3 get the stuff and bam back to volt drops big time. i guess i could get a better amp and 2 good 12s i have a good box i want to try to keep it but i really wana do 4 12s imkinda set on that. its just i need the power for it

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

1rockford1

5,000+ posts
Banned
Thread starter
1rockford1
Joined
Location
soon to be upstate ny
Start date
Participants
Who Replied
Replies
14
Views
2,429
Last reply date
Last reply from
1rockford1
1778578257023.png

Glen Rodgers

    May 12, 2026
  • 0
  • 0
Screenshot_20260511_212804_Amazon Shopping.jpg

Blackout67

    May 11, 2026
  • 0
  • 0

New threads

Top