3d box design

[casedawg350 10+ year member]

can anyone do one for me? ported box for a Fi SSD 12.

Click to read more...

 

[john denver 10+ year member]

What dimensions do you have to work with or do you already have one planed out what tuning how many cubic feet you didnt give much info

 

[john denver 10+ year member]

21W X 14H X 20D

2" port width 23" long

2.269 cubic feet 33.075hz

Top and bottom 21X20

left side 19.25X12.5

right side 18.5X12.5

back 21X12.5

front 18.25X12.5

port piece 1 16.5X12.5

port piece 2 2X12.5

Corner piece 1 11/16X12.5

 

[casedawg350 10+ year member]

PERFECT! thanks a lot man! if you were gonna do a side or two in plexigass, which ones would you do?

 

[loudaccent 10+ year member]

depends on which way its gonna be faceing in the car

 

[casedawg350 10+ year member]

hm, prolly with the port to the back would be better right? opposite back seats? or no?

 

[loudaccent 10+ year member]

yes is it in a trunk car, then i would do the back wall so that if you fold down the seats you can see threw the box

 

[casedawg350 10+ year member]

well its actually gonna be in an Explorer. so if i faced it out, and did the plexi glass the side with the port, that would look pretty tight.