3 Way Active Crossover?

[Athelestan]

Hey guys,

I'm building my car audio system and this is what I have so far:

FRONT STAGE:

TWEETERS:

Image Dynamics XS28 (XS-28) 1" XS Series Silk Dome Tweeter

MIDBASS:

Dayton Audio RS180-4 7" Reference Woofer 4 Ohm 295-374

TWEETER&MIDBASS AMP:

SAX-125.4

MIDS:

FaitalPRO 4FE32 4" Neodymium Professional Woofer 4 Ohm 294-1120

MIDS AMP: (extra 2 channels for rear fill)

PRIME Amplifiers - R250X4 - Rockford Fosgate®

REAR:

REAR FILL:

Kicker 40CS654 6.5" CS-Series 300W Peak Coaxial Speakers

SUB:

Dayton Audio UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Co 295-510

SUB AMP:

Alpine Electronics of America, Inc.

My question is, would a 3Sixty.3 work as a 3 way crossover for these speakers? I understand they cant do "4 way", but could I do 3 way (high, midrange, midbass) and run the sub off the HU? Or would I need a 4 way electronic sound processor/crossover. If I did, would this one work or can you recommend a better one:

AudioControl 6XS (Gray) 6-channel electronic crossover with line driver at Crutchfield.com

Also, this build is still pretty new, so if you can recommend any better parts I'm open to listen. What would you change for this build? I'm still new to sound processors and crossovers, but from what I know, they would basically split up the sound into 3 or 4 outputs(highs,mids,midbass,sub and LR of course) and then you send it to the amplifier to amplify it then to the speakers? Do I have this right?

Thanks for all the help!

Click to read more...

 

[winkychevelle 10+ year member]

The 360.3 should be able to do tweet mid midbass and subs and even a center channel you would just use the rear channel set for the mid bass

so you have

a set for tweets

a set for mids

a set for mid bass

a mono for subs

and an extra mono for a center channel

this adds up to all 8 preouts

 

[Athelestan]

okay. so what do you think of the speakers? Are there any you can think of better ones for the price? I have an 8 inch cut out in my door, but my preview 8 inch didn't fit well, so im returning it and getting the 7 inch Dayton as of now. Are there any better? Thanks

 

[Side Show 10+ year member]

more info on whats the best way to wire this