Octave
10+ year member
Member
I have done a good amount of work for Jerome and his brother. So when he brought in his 2012 Accord I knew we needed to do something special. Jerome is in law enforcement and given the nature of the purposed idea of the install Operation: Under Cover was fitting.
Purpose of this build is to install a competition ready system while being 100% stealth.
OEM radio as signal source (which later got traded out for a Pioneer 80PRS)
Illusion Audio C6 components
Illusion Audio 12XL
Mosconi 4to6
Mosconi DSP dash controller
Arc Audio 2150se
Arc Audio 4100se
Arc Audio 2300se
Straight Wire cabling
Focal BAM sound dampening
Hush Mat sound dampening
The main fuse is mounted to the OEM battery surround using a piece of ABS.
Split loom was put over the power wire and the power wire was ran along factory lines to give an OEM appearance.
The power wire passes through a grommet in the firewall on the passenger side.
The power wire is secured in place with Hush Mat Quiet tape.
Then the power runs along the passenger side tip tied every 6" to OEM wiring.
Purpose of this build is to install a competition ready system while being 100% stealth.
OEM radio as signal source (which later got traded out for a Pioneer 80PRS)
Illusion Audio C6 components
Illusion Audio 12XL
Mosconi 4to6
Mosconi DSP dash controller
Arc Audio 2150se
Arc Audio 4100se
Arc Audio 2300se
Straight Wire cabling
Focal BAM sound dampening
Hush Mat sound dampening
The main fuse is mounted to the OEM battery surround using a piece of ABS.
Split loom was put over the power wire and the power wire was ran along factory lines to give an OEM appearance.
The power wire passes through a grommet in the firewall on the passenger side.
The power wire is secured in place with Hush Mat Quiet tape.
Then the power runs along the passenger side tip tied every 6" to OEM wiring.