2008 Jeep Wrangler build....

[Louisiana_CRX 5,000+ posts]

retail new is $185 here in the US....each DD sub is hand built and goes through a series of test before they leave DD...I have never blown a 1500 series DD but I did rip the surround loose between cone and surround on a 1508 at a show when I was pushing 1800 rms to it......the VC was fine though....I kept playing it anyway...... only increased the rip....I blame it on bad glue...lol

 

[Gearstix 10+ year member]

retail new is $185 here in the US....each DD sub is hand built and goes through a series of test before they leave DD...I have never blown a 1500 series DD but I did rip the surround loose between cone and surround on a 1508 at a show when I was pushing 1800 rms to it......the VC was fine though....I kept playing it anyway...... only increased the rip....I blame it on bad glue...lol

Hmm. I'd like to keep some lows though.

 

[Louisiana_CRX 5,000+ posts]

they hit the lows.....

 

[Gearstix 10+ year member]

Even at such a high tuning?

I'm kinda thinking I should trade my two Mach 5s SPL-12s for some 1508s...

 

[Louisiana_CRX 5,000+ posts]

they will suprise you....many people have heard my CRX...when I ran the 8's ...they were nothing short of impressive

 

[Gearstix 10+ year member]

they will suprise you....many people have heard my CRX...when I ran the 8's ...they were nothing short of impressive

Yeah but I'm in a S-series truck.. lol. Do I have space for 3?

 

[Anniku989 10+ year member]

Nice build

A+

 

[Louisiana_CRX 5,000+ posts]

Yeah but I'm in a S-series truck.. lol. Do I have space for 3?

i think you will...i'm gonna put 3 in my 07 F150....its a regular cab...I won't have the room to do the design like I told you //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I only wish.....I'm gonna run my old school US Amps 100hc that is built on the 2000x chasis...I should get close to 2000 rms at 1.3 mono....I want it to look decent....also besides sound good...I'll start a build on it soon...i have everything but high output alt and battery for under the hood....

 

[Gearstix 10+ year member]

i think you will...i'm gonna put 3 in my 07 F150....its a regular cab...I won't have the room to do the design like I told you //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I only wish.....I'm gonna run my old school US Amps 100hc that is built on the 2000x chasis...I should get close to 2000 rms at 1.3 mono....I want it to look decent....also besides sound good...I'll start a build on it soon...i have everything but high output alt and battery for under the hood....

Those diemensions I sent you will force me to move my seat ahead...

 

[Louisiana_CRX 5,000+ posts]

you'll only need 2.50 for three plus port and basket....so a little less than 3 total internal...so it might can be down sized a little...maybe move it in an inch....is it a reg cab or extended cab?

 

[Gearstix 10+ year member]

Reg cab.

 

[Louisiana_CRX 5,000+ posts]

being a regular cab you may have to forward fire....thats what i'll have to do in my truck and i have a lot more room...if you do that you'll need the port to load about 5 inches from the passenger side corner......standard truck style box...keep the 3 8's as close together as you can on the passenger side

 

[Gearstix 10+ year member]

Hmm. I'd run 4 but I dunno. Gotta see if the Canadian dollar goes up. I would have to get rid of my BNIB Mach 5 SPL-12s though...

 

[Louisiana_CRX 5,000+ posts]

a lot less work if you don't have to do a cut through...plus no worry of leaks and such from the gasket boot.....another expense unless you have it already would be a decent bed cover.....

 

[Gearstix 10+ year member]

I have a camper shell.