- Thread Starter
- #31
So its been a while since i updated this. So i have started on the sub box. After i get that in i should be able to get going on the rest of the stuff. I am looking at some material to wrap my doors, trying to get as close to matching as possible. Once i get that i should be good on the rest of the build. So here we go with the box progress.
The wood is all cut.
The baffle work here.
Even spread of glue and the weight to press it.
The quick mock up of how it looks sideways to show the port.
More to come tomorrow...
---------- Post added at 05:06 PM ---------- Previous post was at 05:06 PM ----------
Alright so i was able to get a little work done with the time i had... So here is the progress on the box.
The wood is all cut.
The baffle work here.
Even spread of glue and the weight to press it.
The quick mock up of how it looks sideways to show the port.
More to come tomorrow...
---------- Post added at 05:06 PM ---------- Previous post was at 05:06 PM ----------
Alright so i was able to get a little work done with the time i had... So here is the progress on the box.