2007 Dodge nitro amp installation

[Aydeezee2002]

I have a 2007 Dodge Nitro and need help installing an Amp to the factory stereo. The factory stereo already has a factory amp installed and I just want to add two 10" subs and an amp to the system...but how? Any help would be appreciated...Thx

Click to read more...

 

[d-REW 10+ year member]

use an loc to wire into the facroty deck this will provide rca and a remote turn on for amp.

 

[Mike465 10+ year member]

I have a 2007 Dodge Nitro and need help installing an Amp to the factory stereo. The factory stereo already has a factory amp installed and I just want to add two 10" subs and an amp to the system...but how? Any help would be appreciated...Thx

The factroy amp for that car is to power the sub. You can catch the speaker wires behind the radio harness.

Left Front Speaker (+/-) gray/purple - gray/yellow

Right Front Speaker (+/-) dk. green/purple - dk. green/yellow

Left Rear Speaker (+/-) gray/lt. green - gray/dk. green

Right Rear Speaker (+/-) dk. green/lt. green - dk. green/gray

You will have to use the second starter with a 560ohm resistor on the ignition harness for your amp turn on because the stock amp turn on and radio acessory uses CANBUS.

Second Starter purple/brown - 560 ohms

 

[Aydeezee2002]

Ok...got a LOC... Now how do I hook this up to the stock system in my 2007 nitro...thanks in advance